Connecting a DVD Player 480i/480p | Samsung TXM 3097WHF specification

I N S TA L L AT I O N

Connecting a Second VCR to Record from the TV

Your TV can send out signals of its picture and sound to be recorded by a second VCR. To do this, connect your second VCR as follows:

1

Connect a set of audio cables between the AUDIO OUT jacks on the TV and the AUDIO IN jacks on the VCR.

(The VCR input jacks might be either on the front or on back of the VCR.)

2

Connect a video cable between the VIDEO OUT jack on the TV and the VIDEO IN jack on the VCR.

Refer to your VCR’s instructions for more information about how to record using this kind of connection.

Connecting a DVD Player (480i/480p)

The rear panel jacks on your TV make it easy to connect a DVD player to your TV.

1

Connect a set of audio cables between the AV-2 INPUT(VCR) or AV-3 INPUT(VCR) jacks on the TV and the AUDIO OUT jacks on the DVD player.

2

Connect a video cable between the COMPO- NENT 1 INPUT (Y/V, PB, PR) or COMPONENT 2 INPUT (Y/V, PB, PR)jacks on the TV and the DVD- OUT (Y, PB, PR) jacks on the DVD player.

Note: For an explanation of Component video, see your DVD player's owner's manual.

2.7 CHAPTER TWO: INSTALLATION

Image 22

Samsung TXM 3097WHF manual Connecting a DVD Player 480i/480p, Connecting a Second VCR to Record from the TV

Contents

Color Television As an Energy Star Partner Thank You for Choosing Samsung Example Antenna Grounding Safety Your New TV InstallationOperation Special Features Troubleshooting List of Features Chapter One Familiarizing Yourself with The TV Audio Input jacks Super Video Input jack Front Panel Jacks´ Video Input jack ¨ Headphone jack Component 2 Input jacks 480i/480p/1080i Rear Panel JacksAUDIO-VIDEO Monitor Output jacks ´,¨,ˆVIDEO Input jack ´ Number buttons Remote ControlReset +100 Remote Control ¸ VCR Controls PIP Controls ¨ CH and CH Channel Up/Down Remote Control PowerTV/Component VOL -, VOL + ¿ Sleep Remote Control ¯ Reset˘ Display ˛ Set Connecting VHF and UHF Antennas Antennas with 300-ohm Flat Twin Leads Separate VHF and UHF Antennas Connecting Cable TVAntennas with 75-ohm Round Leads Cable without a Cable Box Connecting to a Cable Box that Descrambles All Channels Connecting to a Cable Box that Descrambles Some Channels S TA L L AT I O N Connecting a VCR Unplug the cable or antenna from the back of the TV Make sure the jacks you are using are underneath the number Connecting an S-VHS VCR Connecting a DVD Player 480i/480p Connecting a Second VCR to Record from the TV Connecting a Digital TV Set-Top Box 480p/1080i Connecting a Camcorder Installing Batteries in the Remote Control Plug & Play Feature Turning the TV On and Off If you want to reset this feature Viewing the Menus Viewing the Menus and On-Screen DisplaysViewing the Display Selecting a Menu Language Selecting the Video Signal-source Memorizing the Channels Storing Channels in Memory Automatic Method Adding and Erasing Channels Manual Method Press the VOL+ button Adjusting the Volume Changing Channels Labeling the Channels Setting the Clock Option 1 Setting the Clock Manually E R AT I O N E R AT I O N Customizing the Picture Press the Menu button to display menu Using Automatic Picture Settings Customizing the Sound Using Automatic Sound Settings Viewing an External Signal Source Customizing Your Remote Control Setting Up Your Remote Control to Operate Your VCR or DVD VCR Codes DVD Codes Cable Box Setting Up Your Remote Control to Operate Your Cable BoxCodes Fine Tuning Channels LNA Low Noise Amplifier Alternate between On and Off Tilt Digital Noise Reduction Changing the Screen Size TXM3097WHF/ TXM3098WHF Changing the Color Tone Press the CH button to select Color Tone Using the R.Surf Feature Freezing the Picture Setting the On/Off Timer Setting the Sleep Timer Press the VOL + button to select On/Off Sound Features Choosing a Multi-Channel Sound MTS Soundtrack Turbo Sound TXM3296HF Viewing Closed Captions Viewing Picture-in-Picture Activating Picture-in-Picture Selecting a Signal Source External A/V for PIP Press the VOL + button to select PIP On Changing the Size of the PIP Window Swapping the Contents of the PIP image and Main image Changing the PIP Channel Using the V-Chip Setting Up Your Personal ID Number PIN How to Enable/Disable the V-Chip How to Set up Restrictions Using the TV guidelines TV-G E C I a L F E AT U R E S E C I a L F E AT U R E S Viewing the Demonstration Identifying Problems Chapter Five Using Your TV in Another Country Cleaning and Maintaining Your TVSpecifications M O Appendix A.3 M O