Connecting a VCR | Samsung TXM 3097WHF manual

I N S TA L L AT I O N

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 2.1-2.3). Skip step 1 if you have not yet connected to an antenna or a cable system.

1

Unplug the cable or antenna from the back of the TV.

2

Connect the cable or antenna to the ANTENNA IN terminal on the back of the VCR.

3

Connect a coaxial cable between the ANTENNA OUT terminal on the VCR and the antenna terminal on the TV.

A coaxial cable is usually included with a VCR. (If not, check your local electronics store).

4

Connect a set of audio cables between the AUDIO OUT jacks on the VCR and the AUDIO jacks(AV1~AV3) on the TV.

If you have a “mono” (non-stereo) VCR, use the Y-connector (not supplied) to hook up to the left and right audio input jacks of the TV. If your VCR is stereo, you must con- nect two cables.

5

Connect a video cable between the VIDEO OUT jack on the VCR and the VIDEO jack(AV1~AV3) on the TV.

Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.

2.5 CHAPTER TWO: INSTALLATION

Image 20

Samsung TXM 3097WHF manual Connecting a VCR, Unplug the cable or antenna from the back of the TV

Contents

Color Television As an Energy Star Partner Thank You for Choosing Samsung Example Antenna Grounding Safety Operation InstallationYour New TV Special Features Troubleshooting List of Features Chapter One Familiarizing Yourself with The TV ´ Video Input jack ¨ Headphone jack Front Panel JacksAudio Input jacks Super Video Input jack Rear Panel Jacks AUDIO-VIDEO Monitor Output jacksComponent 2 Input jacks 480i/480p/1080i ´,¨,ˆVIDEO Input jack Remote Control Reset´ Number buttons +100 Remote Control ¸ VCR Controls PIP Controls Remote Control Power TV/Component¨ CH and CH Channel Up/Down VOL -, VOL + Remote Control ¯ Reset ˘ Display¿ Sleep ˛ Set Connecting VHF and UHF Antennas Antennas with 300-ohm Flat Twin Leads Connecting Cable TV Antennas with 75-ohm Round LeadsSeparate VHF and UHF Antennas Cable without a Cable Box Connecting to a Cable Box that Descrambles All Channels Connecting to a Cable Box that Descrambles Some Channels S TA L L AT I O N Connecting a VCR Unplug the cable or antenna from the back of the TV Make sure the jacks you are using are underneath the number Connecting an S-VHS VCR Connecting a DVD Player 480i/480p Connecting a Second VCR to Record from the TV Connecting a Digital TV Set-Top Box 480p/1080i Connecting a Camcorder Installing Batteries in the Remote Control Plug & Play Feature Turning the TV On and Off If you want to reset this feature Viewing the Display Viewing the Menus and On-Screen DisplaysViewing the Menus Selecting a Menu Language Selecting the Video Signal-source Memorizing the Channels Storing Channels in Memory Automatic Method Adding and Erasing Channels Manual Method Press the VOL+ button Adjusting the Volume Changing Channels Labeling the Channels Setting the Clock Option 1 Setting the Clock Manually E R AT I O N E R AT I O N Customizing the Picture Press the Menu button to display menu Using Automatic Picture Settings Customizing the Sound Using Automatic Sound Settings Viewing an External Signal Source Customizing Your Remote Control Setting Up Your Remote Control to Operate Your VCR or DVD VCR Codes DVD Codes Codes Setting Up Your Remote Control to Operate Your Cable BoxCable Box Fine Tuning Channels LNA Low Noise Amplifier Alternate between On and Off Tilt Digital Noise Reduction Changing the Screen Size TXM3097WHF/ TXM3098WHF Changing the Color Tone Press the CH button to select Color Tone Using the R.Surf Feature Freezing the Picture Setting the On/Off Timer Setting the Sleep Timer Press the VOL + button to select On/Off Sound Features Choosing a Multi-Channel Sound MTS Soundtrack Turbo Sound TXM3296HF Viewing Closed Captions Viewing Picture-in-Picture Activating Picture-in-Picture Selecting a Signal Source External A/V for PIP Press the VOL + button to select PIP On Changing the Size of the PIP Window Swapping the Contents of the PIP image and Main image Changing the PIP Channel Using the V-Chip Setting Up Your Personal ID Number PIN How to Enable/Disable the V-Chip How to Set up Restrictions Using the TV guidelines TV-G E C I a L F E AT U R E S E C I a L F E AT U R E S Viewing the Demonstration Identifying Problems Chapter Five Specifications Cleaning and Maintaining Your TVUsing Your TV in Another Country M O Appendix A.3 M O