Connect this cable to a two-way splitter | Samsung TXN 1634F

I N S TA L L AT I O N

Connecting to a Cable Box that Descrambles All Channels

1

Find the cable that is con- nected to the ANTENNA OUT terminal on your cable box.

2

Connect the other end of this cable to the VHF/UHF antenna terminal on the back of the TV.

This terminal might be labeled “ANT OUT,” “VHF OUT,” or simply, “OUT.”

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of coaxial cable. (These items are available at most electronics stores.)

1

Find and disconnect the cable that is connected to the ANTENNA IN terminal on your cable box.

This terminal might be labeled “ANT IN,” “VHF IN,” or simply, “IN.”

2

Connect this cable to a two-way splitter.

3

Connect a coaxial cable between an OUTPUT ter- minal on the splitter and the IN terminal on the cable box.

2.3 CHAPTER TWO: INSTALLATION

Image 16

Samsung TXN 1634F manual Connecting to a Cable Box that Descrambles All Channels, Connect this cable to a two-way splitter

Contents

Owner’s Riskofelectricshock Donotopen Thank You for Choosing Samsung Safety Read these instructions Your New TV InstallationOperation Special Features Troubleshooting List of Features Chapter One Familiarizing Yourself with The TV DVD Video input jacks Option Rear Panel JacksVHF/UHF Antenna terminal Remote Control Number buttons¨ +100 Sleep ´ Number buttons +100Size SET ∙ F.F Remote Control ¯ VCR Controls˘ PIP Controls Not available Connecting VHF and UHF Antennas Antennas with 300-ohm Flat Twin Leads Connecting Cable TV Antennas with 75-ohm Round LeadsSeparate VHF and UHF Antennas Cable without a Cable Box Connecting to a Cable Box that Descrambles Some Channels Connecting to a Cable Box that Descrambles All ChannelsConnect this cable to a two-way splitter S TA L L AT I O N Connecting a VCR Unplug the cable or antenna from the back of the TV Connecting a Camcorder Connecting a DVD Player Option Installing Batteries in the Remote Control Press the Power button on the remote control Turning the TV On and OffViewing the Menus and On-Screen Displays Viewing the Menus Selecting a Menu Language Memorizing the Channels Selecting the Video Signal-sourceANT antenna STD, HRC or IRC all cable TV Storing Channels in Memory Automatic Method Adding and Erasing Channels Manual Method Press the VOL+ or VOL- button to select Added or Erased Adjusting the Volume Changing Channels Setting the Clock Or CH button repeat- edly until the correct hour appears Customizing the Picture Press the Menu button to display the menu Using Automatic Picture Settings Using Automatic Sound Settings Press the VOL+ or VOL- button Viewing a VCR or Camcorder TapePress the Menu button twice to exit Setting Up Your Remote Control to Operate Your VCR or DVD Customizing Your Remote ControlTurn off your VCR or VCR Codes DVD Codes Setting Up Your Remote Control to Operate Your Cable Box Cable Box Codes Fine Tuning Channels Changing the Screen Size Using the Surf Feature Setting the On/Off Timer When finished, press the VOL + button Setting the Sleep TimerPress the Sleep button on the remote control Sound Features Choosing a Multi-Channel Sound MTS Soundtrack Extra sound settings Turbo Sound, or Surround Surround Viewing Closed Captions Setting Up Your Personal ID Number PIN Using the V-ChipPress the Menu button three times to exit How to Enable/Disable the V-Chip How to Set up Restrictions Using the TV guidelines TV-Y Young children TV-Y7 Children 7 and over General audienceParental guidance TV-14 E C I a L F E AT U R E S Repeatedly press the CH Button to select a General audience no restrictions Identifying Problems Chapter Five Using Your TV in Another Country Cleaning and Maintaining Your TVSpecifications