IN S TA L L AT I O N

Connecting a Camcorder

The front panel jacks on your TV make it easy to connect a camcorder to your TV.

They allow you to view the camcorder tapes without using a VCR. (Also see “Viewing a VCR or Camcorder Tape” on page 3.11)

1

Locate the A/V output jacks on the camcorder. They are usually found on the side or back of the camcorder.

2

Connect an audio cable between the AUDIO OUT- PUT jack on the camcorder and the AUDIO terminals on the front of the TV.

3

Connect a video cable between the VIDEO OUT- PUT jack on the camcorder and the VIDEO terminal on the front of the TV.

The audio-video cables shown here are usually included with a Camcorder. (If not, check your local electronics store.)

Note: This figure shows the Standard connector-jack panel. The actual configuration for your TV may be different.

Connecting a DVD Player (Option)

The rear panel jacks on your TV make it easy to connect a DVD player to your TV.

1

Connect a set of audio cables between the AUDIO INPUT jacks on the TV and the AUDIO OUT jacks on the DVD player.

2

Connect a video cable between the DVD-IN (Y, Pb, Pr) jacks on the TV and the DVD-OUT (Y, Pb, Pr) jacks on the DVD player.

Note: For an explanation of Component video, see your DVD player's owner's manual.

CHAPTER TWO: INSTALLATION 2.6

Page 19
Image 19
Samsung TXN 1634F, TXN 2022, TXN 1430F manual Connecting a Camcorder, Connecting a DVD Player Option