Samsung UA46F7500BMXSQ, UA65F9000AMXSQ manual Using the WPS Button, Failed Wireless Connection

Using the WPS Button

If the router has a WPS push button, you can use it to connect the TV to the router automatically. WPS automatically configures the SSID and WPA key settings.

111Setting Network Type to Wireless automatically displays a list of available wireless networks.

222

333

Select WPS(PBC) and then press the router's WPS button within two minutes.

The TV automatically acquires the SSID and security key settings and connects to the network. A confirmation message is then shown once a connection is established. Select OK to proceed.

Failed Wireless Connection

Wireless network connection failed, or no wireless router selected. Try Now Try Now

Go to Network Settings and select the correct router.

Unable to connect to a wireless router Try Now Try Now

Check the following:

111Check that the router is turned on, and if it is, turn it off and on again.

222Enter the correct security key if required.

IP auto setting failed Try Now

Perform the following or set the IP address manually from IP Settings.

111Make sure that the DHCP server is enabled on the router and unplug and plug the router back in.

222

333

Enter the correct security key if required.

If this does not work, contact your Internet Service Provider for more information.