Samsung UA65JS9500KXXV, UA88JS9500KXXV Initial Setup, Using the TV Controller, Password Change

Initial Setup

When you turn on your TV for the first time, it immediately starts the Initial Setup. During Initial Setup, your TV pairs with the Samsung Smart Control, connects to your network, implements Smart Hub agreements, links to the source of your live TV signal, and sets up control of your cable or set-top box.

To learn more about operating your TV, launch the TV's built in e-Manualafter you have completed the Initial Setup. For Information about the e-Manual, see "The e-Manual" on page 10.

Password Change

System > Change PIN

Changing the TV’s password.

1.Run Change PIN and then enter the current password in the password field. The default password is “0-0-0-0”.

2.Enter a new password and then enter it again to confirm it. The password change is complete.

-- If you forgot your PIN code, press the buttons in the following sequence to reset the PIN to “0-0-0-0”:

When the TV turns on: MUTE → Volume up → RETURN → Volume down → RETURN → Volume up → RETURN

Using the TV Controller

You can use the TV Controller on the back of the TV instead of the remote control to control most of the functions of your TV.

: Opens Smart Hub.

Control Menu : Opens the menu

: Selects a source. : Turns off the TV.

Control Stick

The Control Stick is located on the lower left corner of the back of the TV.

Remote control sensor

English - 4