Black Box MD1640A, MD1641A manual Change Login Password #I, Change Setup Password #S

CHAPTER 7: Callback Security and Remote Configuration

Change LOGIN Password #I

The default LOGIN password for your Series II Modem is "BLACK BOX". If you choose to activate callback security, you should change the LOGIN password using this command in the following format:

AT#Ixxxxxxxxxx<CR> (where xxxxxxxxxx is the current LOGIN password)

Your modem will respond with "OK", indicating that you can enter the new LOGIN password as follows:

AT#I=yyyyyyyyyy<CR>

You can select any combination of keyboard characters (upper/lower case sensitive) between six and ten characters long.

Change SETUP Password #S

The default SETUP password for your Series II Modem is "MODEMSETUP". If you choose to activate callback security, you should change the SETUP password using this command in the following format:

AT#Stttttttttt<CR> (where tttttttttt is the current SETUP password)

Your modem will respond with "OK", indicating that you can enter the new SETUP password as follows:

AT#S=uuuuuuuuuu<CR>

You can select any combination of keyboard characters (upper/lower case sensitive) between six and ten characters long.

Erase Callback Password #RCBNxx

This command erases the single callback password specified by xx (0 through 29).

Erase Callback Phone Number #RDNxx

This command erases the single phone number specified by xx (0 through 29).

113