Black Box MD1641A, MD1640A manual S30 Inactivity Timer, S32 Time Elapse for Escape Sequence

SERIES II INTELLIGENT DATA/FAX MODEMS

S30

Inactivity Timer

Unit:	Minutes
Range:	0-255
Default:	0
Description:	S30 causes the modem to disconnect if no data is
	transmitted or received for a specified time. This
	timer runs during both Reliable and Normal
	error correction connections. The timer restarts
	any time a data character is passed through the
	serial port (either sent or received). If noise on
	the phone line causes an error to be received
	during Normal mode, this also restarts the timer.
	The inactivity timer is disabled by setting S30 to
	zero, which is the factory default setting.

S32

Time Elapse for Escape Sequence

Unit:	Seconds
Range:	0-255
Default:	20
Description:	S32 sets the time period to validate the escape
	sequence. If the time interval expires before
	the escape sequence is employed (by hitting
	RETURN), the escape sequence is aborted.
	The default time is 20 seconds.

S34

Buffer Length of Command Mode...After On-line Escape

Sequence

Unit:	ASCII characters
Range:	0-60
Default:	10
Description:	If the number of characters after AT exceeds the
	S34 buffer length value, the buffer is cleared and
	the escape sequence is aborted.

100