Black Box MD1640A, MD1641A manual S26 Failed Password Attempts, S29 Local Inactivity Timer

CHAPTER 6: S-Registers

dropout time can be increased in 100-mSec intervals, up to a maximum of 25.5 seconds (S25 set to 255). The default S25 setting of zero corresponds to a dropout time of 50 mSec.

All other possible settings (1 through 255) correspond to their multiples of 100 mSec.

S26

Failed Password Attempts

Unit:	Failed attempts
Range:	0-255
Default:	0
Description:	S26 counts the number of times there has been
	a failed password attempt. For example, if you
	entered ATS26? and the message 003 were
	displayed, it would mean that someone has
	failed three times to gain access to your modem
	using its password security system.

S29

Local Inactivity Timer

Unit:	Minutes
Range:	1-255
Default:	20
Description:	S29 defines the amount of idle time that can
	elapse between AT commands after the SETUP
	password has been entered. If this timer expires,
	the LOGIN and SETUP passwords will have to
	be re-entered. S29 only takes effect when the
	modem has been sent a #DB1 command, which
	secures the modem from local and remote con-
	figuration or dialing (i.e., no AT commands can
	be sent until the LOGIN and SETUP passwords
	have been entered).

99