Black Box MD1641A Backspace Character, Wait Time for Dial Tone, Time for Carrier Abort Timer

SERIES II INTELLIGENT DATA/FAX MODEMS

S5

Backspace Character

Unit:	Decimal equivalents of ASCII characters
Range:	0-127
Default:	8 (^H)
Description:	S5 defines the character recognized as
	BACKSPACE. S5 may be set for any ASCII
	character.

S6

Wait Time for Dial Tone

Unit:	Seconds
Range:	2-255
Default:	2
Description:	S6 sets the time the modem waits after the
	RETURN key is pressed before executing a dial
	command. The default setting is two seconds.

S7

Time for Carrier (Abort Timer)

Unit:	Seconds
Range:	1-255
Default:	45
Description:	S7 defines the Abort Timer (lack of carrier)
	delay time. The default value is 45 seconds. This
	means that, after dialing, the modem waits for a
	carrier signal for up to 45 seconds and, if none is
	detected, aborts the call. The maximum S7 value
	is 255.

S8

Pause Time for Comma

Unit:	Seconds
Range:	0-255
Default:	2
Description:	S8 sets the length of the pause caused by a
	comma inserted in a dialing command. The

94