Timer Recording

Mitsubishi offers 3 ways to set your VCR to record upcoming broadcasts. Choose from:

ConventionalVCR timer recording

Quick Program (easy) -- VCR does not need to be on to begin programming

VCR Plus+® system programming (easy)

You can schedule up to 8 recording events within a one month period. Clock must be set before any timer recordings can be performed.

Conventional VCR Timer Recording

1Load a tape with its erasure prevention tab intact into the VCR.

2Press MENU. VCR Main Menu appears on your screen. Use the ADJUST buttons to select Program to record. Press ENTER.

If there is at least one programmed recording already entered, you will see the Recap screen. Wait 4 seconds, and the VCR Plus+ system menu will appear.

IMPORTANT

If you have already programmed 8 recording events, Program memory is full will appear on your screen for 3 seconds, and then the Recap screen will appear. Use CANCEL to erase an entry before you can add another one.

3VCR Plus+ system menu appears. See page 31 to learn how to program with VCR Plus+® system. To pass this screen, press ENTER.

4Program to record menu appears. Press the ADJUST buttons to choose the channel you would like to record; for example, channel 2. Press ENTER.

If you are using a cable box that the VCR cannot control, enter the channel number on which the cable box sends a signal to your VCR (usually channel 3 or 4).

If you are recording from a DSS®, PRIMESTAR® or DISH Networksatellite receiver, simply choose the channel you would like to record; for example, channel 245. SAT will display next to the channel number.

To record from an external source, press INPUT or press the ADJUST buttons to:

Select External L1 for a source connected to the rear panel. Select External L2 for a source connected to the front panel.

28

»VCR Main Menu￿ ÂProgram to record￿ ðPrograManager￿ ÃCustomize choices￿ ÈS-VHS Set-Up￿ ÄFirst Time Set-Up￿

º¹MENU to go back￿

¹¹ADJUST to select￿ ²´³¹ENTER to enter￿ · ¹¹ADJUST to select￿

￿

ÂProgram

to record￿

 

CH

DAY

ON

OFF￿

 

10

TH14

9:00p10:00pSP￿

¤---

--

--:-- --:-- SP￿

----- --:-- --:-- SP￿

----- --:-- --:-- SP￿ º¹MENU to go back￿

¹¹ADJUST to select￿ ²´³¹ENTER to enter￿ · ¹¹ADJUST to select￿

￿

Recap screen

ÂVCR Plus+ system￿

￿

Use number keys to enter￿ the PlusCode number￿

--------￿

￿

or press ENTER to￿ program.￿

￿

Press MENU to go back.

ÂProgram to record￿

ÄChannel

 

2￿

ÄDay

 

--￿

ÄStart time

--:--￿

ÄStop time

--:--￿

ÄRecord speed

AUTO￿

º¹MENU to go back￿

¹¹ADJUST to select￿ ²´³¹ENTER to enter￿ · ¹¹ADJUST to select￿

￿

Page 30
Image 30
Mitsubishi Electronics HS-U778 manual Conventional VCR Timer Recording, ConventionalVCR timer recording