Timer Recording

Canceling a recording in progress

There are two ways to cancel a recording in progress:

Press STOP. The recording stops, but the program is not cancelled. Therefore, if you press REC, the recording will start again.

Press POWER on the front panel. The recording stops and the program is cancelled.

Changing while programming

To change one of your settings (such as start time) while you are programming: Press ENTER to move forward through the program list.

Press CANCEL to move backward.

Then use the ADJUST buttons to change the setting.

You will cancel the entire program if you press CANCEL while the channel number is flashing.

Quick Program

Quick Program is an exclusive Mitsubishi feature that simplifies the process of programming your VCR to record. When you press QUICK PROGRAM/VCR Plus+ on the remote control, you will immediately see the VCR Plus+ system menu and can begin programming right away.

You can use this feature even when the VCR is stopped, playing, fast forwarding, rewinding, or off. (Quick program does not work while using OTR2.)

Quick Program is also an Active A/V Network feature. If you have a Mitsubishi TV with Active A/V Network, see page 50 for more information.

1Press QUICK PROGRAM/VCR Plus+ on the remote control. If the VCR is off, it will turn on. After tuning your TV to the correct channel or input,VCR Plus+ system menu will appear.

IMPORTANT

If the VCR memory is full, Program memory is full will appear for 3 seconds, and then the Recap screen will appear. Use CANCEL to erase an entry before you can add another one.

2Complete steps 3 through 10 in ConventionalVCR timer recording. (See page 28.)

When you have finished, press QUICK PROGRAM/VCR Plus+ again.

If the VCR is stopped, it will turn off and be ready to record your program at a later time.

If the VCR is playing, recording, fast forwarding or rewinding, the menus will turn off, but the VCR power will remain on.

3When you are finished with all programming, check the following:

If you have a cable box, a digital cable box, a PRIMESTAR® or a DISH Networksatellite receiver, leave the cable box or receiver turned ON.

If your VCR does not control your cable box, leave the box tuned to the station you wish to record.

Make sure the VCR is turned OFF and the programmed recording light is lit before the recording time.

Programming not cancelled

1

2

3

 

4

5

6

STOP

7

0

X2

8

9

 

STOP

Programming cancelled

POWER

7

8

9

 

 

0

X2

forward

 

 

 

ENTER

backwardADJUST

CANCEL

 

 

 

adjust

 

 

 

ADJUST

1

2

3

QUICK PROGRAM

4

5

6

7

8

9

 

 

0

X2

 

VCR Plus+

ÂVCR Plus+ system￿

￿

Use number keys to enter￿ the PlusCode number￿

--------￿

￿

or press ENTER to￿ program.￿

￿

Press MENU to go back.

Recap screen

ÂProgram to record￿

CH DAY

ON

OFF￿

¤2MO11 11:30a 1:30pSP￿ 10TH14 9:00p10:00pEP￿ 7E-WE 8:00a 9:00aEP￿

S125FR15 5:30p 5:45pEP￿ 8TU19 11:00p 0:30aSP￿ S980M-F 7:00p 7:15pEP￿ 15SA 2 8:00p 9:00pEP￿

46SU17 7:00a 9:00aSP

30

Page 32
Image 32
Mitsubishi Electronics HS-U778 manual Quick Program, Canceling a recording in progress, Changing while programming