Timer Recording

6Recap screen will appear. The program you have chosen to record will be highlighted.

The channel number will appear in blue color. Make sure that the correct channel number is shown on the screen. If the displayed number is not correct, press INPUT to make the number flash, then press the ADJUST buttons to correct the channel number. Press the ENTER to complete. “S” will appear next to the channel number when you select a satellite channel.

7If you wish to change the record speed, press ENTER repeatedly until the record speed is flashing. Change the recording speed by pressing the ADJUST buttons. Press ENTER.

8To program additional recording times, select an empty program line by pressing the ADJUST buttons. Press ENTER. You will return to the VCR Plus+ system menu. Continue theVCR Plus+® system programming procedure from step 3.

9When you are finished with all programming, check the following:

If you have a cable box, a digital cable box, a PRIMESTAR® or a DISH Networksatellite receiver, leave the cable box or receiver turned ON.

If your VCR does not control your cable box, leave the box tuned to the station you wish to record.

Turn the VCR power OFF and make sure the programmed recording light is lit.

If you want to stop the programmed recording after it starts, press POWER on the front panel.

Recap screen

ÂProgram to record￿

CH DAY

ON

OFF￿

¤2 MO11 11:30a 1:30pSP￿

----- --:-- --:-- SP￿

----- --:-- --:-- SP￿

----- --:-- --:-- SP￿ INPUT to correct channel￿

¶ ¹¹ADJUST to select￿ ²´³¹ENTER to enter￿ · ¹¹ADJUST to select￿

￿

POWER

32

Page 34
Image 34
Mitsubishi Electronics HS-U778 manual ¤ 2 MO11 1130a 130pSP