Advanced Features

RF converter

If your TV has audio and video inputs, turn the RF converter OFF. If your TV does not have audio and video inputs, keep the RF converter set to ON. It is preset by the factory to ON.

3Complete steps 1 and 2 on the previous page. Customize choices menu appears. Use the ADJUST buttons to select RF converter. Press ENTER to select ON or OFF.

4Press MENU twice to turn off the menus.

IMPORTANT

If the RF converter is set to ON, you aren’t required to press VCR/TV to play a tape or to use VCR menus. The VCR light will automatically light up when you press PLAY or MENU. Be sure to set the TV to the video channel (See page 10).

PerfecTape®

PerfecTape® is an exclusive Mitsubishi feature that tests the quality of video tapes you will record on. After each test, the VCR will adjust its internal circuitry in order to make the best possible recording on your tape.

setting up PerfecTape®

You can set up PerfecTape® to function two ways.

If you want the VCR to automatically test any non-recorded tapes when the tape is loaded, select AUTO.

If you do not want the VCR to automatically test tapes, select MANUAL. PerfecTape® will now function only when you start a test. Any tape with the erasure prevention tab intact can be manually tested.

It will not automatically test recorded tapes – you must choose to test those yourself.

3Complete steps 1 and 2 on the previous page. Customize choices menu appears. Use the ADJUST buttons to select PerfecTape.

4Press ENTER to set PerfecTape to AUTO or MANUAL.

5Press MENU twice to turn off the menus.

using PerfecTape® automatically

1Load a tape that has not been recorded into the VCR.

The VCR will display the testing status screen. When testing, the VCR records for one second, then evaluates the recording it made. The entire test takes about 8 seconds. During this time, the PT light on the front panel will flash. If you wish to cancel the test, press STOP on the remote while the PT light is still flashing.

When the test is done, the VCR will display the rating of your tape for 8 seconds. On the front panel, the PT light will shine steadily, indicating that the VCR has set its internal circuitry to make the best possible recording on this tape.

ÃCustomize choices￿

￿

ÄVideo mute

(ON )

ÄAuto power save

(OFF)￿

ÄRF converter

 

(ON )￿

ÄPerfecTape

 

(AUTO)￿

Go to next page ¤￿

º¹MENU to go back￿

¹¹ADJUST to select￿ ²´³¹ENTER to change￿ · ¹¹ADJUST to select￿

￿

ÃCustomize choices￿

￿

ÄVideo mute

(ON )

ÄAuto power save

(OFF)￿

ÄRF converter

(ON )￿

ÄPerfecTape

 

(AUTO)￿

Go to next page ¤￿

º¹MENU to go back￿

¹¹ADJUST to select￿ ²´³¹ENTER to change￿ · ¹¹ADJUST to select￿

￿

 

 

 

 

 

 

 

PerfecTape:SP￿

 

 

 

Band

S-ET record: ON￿

 

 

 

￿

 

 

 

 

High

Û¡¡¡¡¡¡¡¡¡àààààààÝ

 

 

￿

 

 

 

 

Mid

Û¡¡¡¡¡¡¡¡¡¡¡àààààÝ

￿

 

￿

 

 

 

 

Low

Û¡¡¡¡¡¡¡¡¡¡¡àààààÝ

￿

 

￿

 

 

 

 

Test is completed

 

 

 

 

 

 

 

48

Page 50
Image 50
Mitsubishi Electronics HS-U778 manual RF converter, Setting up PerfecTape, Using PerfecTape automatically