Recording
Selecting S-input Setting
To watch the picture from other equipment through the VCR, you have to select the
1Press MENU on the remote control. VCR Main Menu appears.
2Press the ADJUST buttons on the remote control to select
3Press the ADJUST buttons to select Front
4Press ENTER to select which input jack to input.
•select OFF when you want to input signals from video input jack.
•select ON when you want to input signals from
5Press MENU twice to exit the menus.
Using S-through
This function allows you to view the video signal from the equipment connected to the back of theVCR even when the VCR is off. To use this function, you have to connect your VCR and TV, and also connect your VCR and the other equipment with an
1Press MENU on the remote control. VCR Main Menu appears.
2Press the ADJUST buttons on the remote control to select
3Press the ADJUST buttons to select Rear
4Press ENTER to set Rear
5Press MENU twice to exit the menus.
»VCR Main Menu ÂProgram to record ðPrograManager ÃCustomize choices
º¹MENU to go back
¶¹¹ADJUST to select ²´³¹ENTER to enter · ¹¹ADJUST to select
|
| ||
(AUTO) | |||
(OFF) | |||
ÄFront |
| (ON ) | |
ÄRear | (OFF) | ||
ÄRear | (OFF) | ||
º¹MENU to go back |
¶¹¹ADJUST to select ²´³¹ENTER to change · ¹¹ADJUST to select
|
| ||
(AUTO) | |||
(OFF) | |||
ÄFront | (OFF) | ||
ÄRear |
| (ON ) | |
ÄRear | (OFF) | ||
º¹MENU to go back |
¶¹¹ADJUST to select ²´³¹ENTER to change · ¹¹ADJUST to select
»VCR Main Menu ÂProgram to record ðPrograManager ÃCustomize choices
º¹MENU to go back
¶¹¹ADJUST to select ²´³¹ENTER to enter · ¹¹ADJUST to select
|
| |
(AUTO) | ||
(OFF) | ||
ÄFront | (OFF) | |
ÄRear | (OFF) | |
ÄRear | (ON ) | |
º¹MENU to go | back |
¶¹¹ADJUST to select ²´³¹ENTER to change · ¹¹ADJUST to select
25