Setting Up Your VCR

4Press ENTER to select the correct code for your satellite receiver.

Manufacturer

Code

GE

1

RCA

1, 8

PRIMESTAR®

2

Sony

3

DISH Network

4

Toshiba

5

Panasonic

6

Hughes

7

none

OFF

5After you have selected, press MENU twice to exit the menus.

IMPORTANT

After you have connected the satellite receiver and set the brand code, you need to see if your VCR can control your satellite receiver. To do this, use CHANNEL or number buttons on the VCR remote to tune to a satellite channel. If the satellite channels appear on your TV, then your VCR can control your satellite receiver.

Adding and Deleting Channels

If necessary, you can manually add or delete channels after you have completed the automatic channel memorizing. You cannot do this for channels coming from a satellite receiver.

1Make sure that video mute is ON. See page 47.

2Set the VCR’s input to Tuner. To do this, press INPUT on the remote control until a channel number appears on the screen or the front panel display.

3Press MENU on the remote control. VCR Main Menu appears.

4Press the ADJUST buttons on the remote control to select First Time Set-Up. Press ENTER.

5You will see the First Time Set-Up menu. Press the ADJUST buttons to select Add/delete channels. Press ENTER.

IMPORTANT

If you are recording, playing back a tape, receiving a video signal from an external input, or watching a satellite receiver channel, then Not available will flash on-screen. To correct this, stop the tape or turn off the menus and switch the VCR’s input to tuner.

6You will see the screen for adding or deleting channels. Use the ADJUST buttons to select the channel that you want to add or delete. Press ENTER to add the channel; press CANCEL to delete it.

7When you are finished adding or deleting channels, press MENU three times to exit the menus.

IMPORTANT

If you use automatic memorizing again, you will lose all of the manual changes you made. All of the channels you deleted will be added; all of the channels you added will be deleted. If your cable box receives only one or two digit channels, you cannot add a three-digit channel.

ÄFirst Time Set-Up￿ ÅSet the clock￿ ÆMemorize channels￿ ÇAdd/delete channels￿

±Sat.receiver (OFF)￿

￿

º¹MENU to go back￿

¹¹ADJUST to select￿ ²´³¹ENTER to enter￿ · ¹¹ADJUST to select￿

￿

ÇAdd/delete channels￿

￿

Channel 39￿

Not in memory￿

￿

º¹MENU to go back￿

¹¹ADJUST to select￿ ²´³¹ENTER to add￿

· ¹¹ADJUST to select￿ -¹¹¹¹¹CANCEL to delete

16

Page 18
Image 18
Mitsubishi Electronics HS-U778 manual Adding and Deleting Channels, Sony Dish Network Toshiba Panasonic Hughes None