
Advanced Features
IMPORTANT
Make sure that the clock has been set correctly before memorizing the contents of the tape.
1Load the tape. Press MENU on the remote control. VCR Main Menu appears. Press the ADJUST buttons to select PrograManager. Press ENTER.
2The PrograManager menu will appear. Press the ADJUST buttons to select Assign/Enter Tape No. and press ENTER.
3The screen for selecting the tape number appears. Press the number button that corresponds to the desired tape number (for example, no.0). Press
ENTER.
4The screen for setting the tape length appears. The tape length that you have set in the audio and video function menu will be highlighted. If the highlighted setting is not match the length of the tape to be recorded, press the ADJUST buttons to highlight the correct setting. Press ENTER.
5The message to confirm the selected tape number and tape length will appear. Press ENTER to enter the displayed tape number and length. If the displayed number or length is not correct, press MENU. The PrograManager menu will reappear. Set the tape number and length again by following the directions from step 2.
6The contents of the tape of the selected tape number will be displayed. Press MENU three times to turn the menu off. If you want to search the listed program, follow the procedure from step 4 on the next page.
7Record the program. The contents of that tape will be memorized automatically when you eject the tape.
After the recording is finished, write the tape number on its label to avoid assigning the wrong tape number when you memorize the contents for that tape again.
When you want to memorize the data in addition to previously memorized programs, follow the procedure from step 1 on the previous page.
»VCR Main Menu ÂProgram to record ðPrograManager ÃCustomize choices
º¹MENU to go back
¶¹¹ADJUST to select ²´³¹ENTER to enter · ¹¹ADJUST to select
ðPrograManager Your choices are:
ÄAssign/Enter Tape No. ÄDisplay memorized data
Use ADJUST to select, and ENTER.
Press MENU to go back.
ðPrograManager
Tape No.0 Page 1/1
No data
¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹ Use
Press MENU to go back.
ðPrograManager Tape No.0
Tape length:
Use ADJUST to select, and ENTER.
Press MENU to go back.
ðPrograManager Tape No.0
Tape length:
PrograManager will not work correctly if
Tape No. and Tape length setting is wrong. Press ENTER to confirm. Press MENU to go back.
ðPrograManager
Tape No.0 Page 1/1
No data
¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹
Press MENU to go back.
43