
Timer Recording
Program caution
If your VCR is set to record, but the power is still ON within 3 minutes before timer recording starts, this screen will appear to remind you to turn off the VCR.
If the VCR is still turned on 12 seconds before the start time of the recording, that timer recording will be cancelled.
TV programs that end on the day after
If you want to start the recording at 11:00 PM and end it at 2:00 AM the next day, simply set the start time to 11:00 PM on the recording start day and the end time to 2:00 AM. There is no need to change the day of the week.
Program skip using menus
Sometimes you may want to skip one day of a timer recording but do not want to erase it. Program skip will prevent the recording, for that day only, of a program you have scheduled to record every day or every week.
1Press MENU on the remote control. Your VCR will turn on and VCR Main Menu will appear. Press the ADJUST buttons to select Program to record. Press ENTER.
2Recap screen will display for 4 seconds. While this screen is displayed, press the ADJUST buttons to place the cursor arrow next to the program you wish to skip.
3Press STOP. The cursor arrow will change to a .
program caution
REC in 3 min
Turn off VCR
ÂProgram to record
CH DAY ON OFF
2 MO11 11:30a 1:30pSP
10 TH14 9:00p10:00pEP
¤2
---
¶ ¹¹ADJUST to select ²´³¹ENTER to enter · ¹¹ADJUST to select
ÂProgram to record
CH | DAY | ON | OFF |
2 | MO11 11:30a 1:30pSP | ||
10 | TH14 | 9:00p10:00pEP | |
X 2 | 8:00a 8:30aSP |
4 Press MENU twice to turn off the menus.
Use STOP to skip on/off |
¶ ¹¹ADJUST to select |
To resume recording every day or every week, change the to the cursor arrow by following steps 1 to 4 again.
Program skip using the POWER button
If you have entered only one program into your VCR’s memory, you can skip the program without going into the VCR’s menus. Simply press POWER on the front panel once. The programmed recording light will turn off, and the program will be skipped. If you decide not to skip the program, press POWER on the front panel twice; the programmed recording light will light up again.
Changing timer recording settings
1Press MENU on the remote control. Your VCR will turn on and VCR Main Menu will appear. Press the ADJUST buttons to select Program to record. Press ENTER.
2Recap screen will display for 4 seconds. While this screen is displayed, press the ADJUST buttons to place the cursor arrow next to the program you wish to change. Press ENTER. You will see the Program to record setting menu.
3Press ENTER repeatedly to select the item you wish to change. Use the ADJUST buttons to change it. Then press ENTER repeatedly to return the altered program to the Recap screen.
4Press MENU twice to turn off the menus. Then press POWER to turn off
the VCR. Make sure the programmed recording light is on.
²´³¹ENTER | to enter |
· ¹¹ADJUST | to select |
|
POWER
PROG REC
PROG REC
Recap screen
ÂProgram to record
CH DAY | ON | OFF |
¤2 MO11 11:30a 1:30pSP
---
---
---
¶¹¹ADJUST to select ²´³¹ENTER to enter · ¹¹ADJUST to select
ÂProgram to | record |
| |
ÄChannel |
| 2 |
|
ÄDay | Monday 11 | ||
ÄStart time |
| 11:30am | |
ÄStop time |
| 1:30pm | |
ÄRecord speed | EP | ||
º¹MENU to | go back |
¶¹¹ADJUST to select ²´³¹ENTER to enter · ¹¹ADJUST to select
34