Maytag 9962 warranty Selecting Cycles & Options, Smart Start, Delay Start

SELECTING CYCLES & OPTIONS

Your dishwasher is designed with a system which allows

computer	controls	to interpret		and adapt	to vacious sit-
•		.
nations with human-hke			reasoning, It also provides				you
•	.	,	.	,	.	.	" ¢.

the opportunity- to select varlons cycles ann optmns o_ ),our choosing[The following information will help yon

select the appropriate cyele and options for each load•

SMART START

This utilizes sensors to develop an optimum cycle based on the water temperature, soil level, detergent pres-

thee, and u ash-- arm speed and rotation. The sensors

continuously monitor these conditions to adjust the cycle and time up or dox_mas needed, lou may notice

the time in the display change as the cycle is adjusted.

Itis activated bypressing the SMART START pad. The

indicator on the pad will light and a tone will sound, WASH, ;;_'.',?,and an estimated cycle time will appear in

•	•	•	,-_	•
the dis la_
P ' )"	to select a drying	option	with this	,cle.
Yon ]nay want				e_

The control remembers the last option selected so it is not necessa D- to reselect it each time unless yon want to

change the option. Refer to HEATED DRY on page 9 for more information.

DELAY START

This feature can postpone or interrupt any cycle from

10 minntes to 12 hours

by pressing the DELAY pad.

The time increases by 10 minute increments until 30 minutes is reached• It then increases to 60 minutes and

continues to increase in i hour increments until 12 hours is reached.

To set up a delay:

Press SMART START and/or an}' options. Then, quick- ly, press and hold the DELAY pad until the desired amount of delay time appears in the display.

NOTE: If delay is chosen Without tlr_ _se_ectfi?_a- _ cycle and/or optiorls, the &_hwa_h_the

last wash cycle used in the, del W,_,_i o_ _,_ _f:_l

The indicator on the pad lights and a tone sounds when selected. DELAY and the delay time remaining appear

in the display as the time is counted down to the start

of the cycle.

To interrupt a cycle:

Press and hokl the DELAY pad until the desired

amount of time is displayed. The cycle will resume when the delay time runs out or when the DELAY pad is pressed again.

To cancel a delay:

-		.....	1	n_ht Will _O		_°
Press the DELA'*		Dao a_ain. Tne mmeator
. ,	,	_.,,	" ....	_"	-

out anti rue eyele _vnl stal_[ nlulqeolatelv.

								"
OPTIONS
Pressing the OPTIONS pad allows you to select any of
the six additional lit pads. When selected, the pad will
lieht and a tone will sound. Options inehlde:
_"
SANI SCRUB is designed for loads with heavy or
dried-on soilss. It cheeks the water temperature of the
mare _ash and final rinse to improve eleamng and dr).-
ing results. (HEATED DRY may or may not be select-
ed with this cycle.)
When	selected,		the	indicator		on the		pad will light		and a	_.
tone sounds. "_SH,				,',',,;', and			an estimated		e?cle	time
appear	in the	display.			_	,	_	_ .
..............				,
_ul,_	vv_a_		_sa snort cycle for use on (rusty or ve_"
lightly soiled items you wish to store or reuse immedi-
ately.											imv
When	selected,		the	indicator		on the		pad will	light and a		_"
tone sonnds.		\VASH, ,'2',,,d7 and					an estimated		evcle	time
appear	in the	display.
RINSE	& HOLD			is a	cycle		designed to rinse			a few	Car)
soiled	dishes	being		held	until		tim dishwasher		is full. It		_'_
helps to minimize an)' potential							food odors. A dD' cycle				e_
is not	available with this cycle since the dishes are not										_"
yet washed.
											¢_
							2 Rinses		11		_.
							Main Wash		Gal.		_.
							2 Rinses
							Dry

_"

R_I NSE..... & IROL"D	_"	'
rinses, _.shes being.	held for	Rinse	2
a&tla0adtordducepotential		OFF	Gal.
food odor in the dishwasher.

Page 7