Maytag 9962 warranty Starting The, Display Window, Child Lock, Dishwasher, Cycle Progression, Page

Models: 9962

1 15
Download 15 pages 20.21 Kb
Page 9
Image 9
Child Lock

When the cycle is selected, the indicator on the pad will light and a tone sounds. RINSE, 7."!P,and an estimated

cycle time appear in the display,

HEATED DRY improves dha;ingby adding heat to the dry cycle. When selected, tbe indicator on the pad will light and HEATED DRY will appear in the displ W.

If you choose not to use this option, press the HEAT- ED DRY pad to turn the ligbt off and the dishes will be

fan dried only. Towel d_ng of some items may be nec- essary,

With either of these d_7 options you may notice moist air being released from the dishwasher througb the vent located below the controls. You m W also notice that some items with concave bottoms or Teflon-coat-

ings are difficult to dry and may need towel drying before putting them away_

HEATED DRY and make sure the incoming water

temperature is 120°-140°F.

NOTE: For best drying results, use a rinse aid and

DELICATE WASH call be used with any cycle, inelnding Smart Start to create a gentle wash and dry,

cycle for china and eustal. Press the Delicate Wash pad after selecting a cycle. The indicator on the pad will light and a tone will slmnd. DELICATE WASH will

light in tile display. Use half as much detergent as nor- really required,

CANCEL any cycle before it's finished by pressing this pad. The indicator on the pad will light and a tone will sound. Tile dishwasher will drain, if needed, and shnt off.

Child Lock

To prevent children from accidentally starting the dish- washer or changing the cycle and options, press the padlock symbol t_ located next to the Smart Start pad 3 tinles within .3 seconds. LOCKED will appear in the display. To cancel, again press the padlock .3times with-

in .3seconds.

NOTE: This does not lock the door, only the eon- trols.

]

I

STARTING THE

DISHWASHER

After loading, close the door; press the door until the latd_ clicks.

NOTE: If your water heater is located a long dis- lance from the kiteheu, nm the water from the hot water tap to clear the line of cold water before

starting.

Turn the dishwasher on by firmly pressing the pad cor- responding with the chosen cycle. Pressing Smart Start,

or an optional cycle (Saul Scrub, Quick Wash or Rinse

&Hold) will start the dishwasher (fill will begin). The indicator light [br the selected cycle will gknv.

Display Window

Through words, symbols and nmnbers the display win-

Cycle Progression:

The dishwasher will indicate the portion of the cycle it dow indicates what is happening in the dishwasher.

is currently in. Estimated time remaining in the cycle (in minutes) also appears in the display.

WASH _ This symbol flashes to indicate the wash circulation has started. Soiled items can be added while in this portion of the cycle.

RINSE .:':'iF:'7This. symbol flashes to indicate the rinse circulation has started.

DRY IJJ,_'lJJJThe fan symbol will light during the d_ period and the fan blades will flash when the fan is on. The heat symbols will light when Heated Dry is select- ed. If the sensors indicate that additional drying is needed, the fan may run for a few minutes after the end

of the cycle.

Special Indicators:

CLEAN - appears at the end of a complete wash cycle. It will remain lit until the door has been opened con- tinuonsly for 60 seconds.

DELAY - appears when the Delay pad is pressed. The

DELICATE WASH appears when this option has time (in h°urs °r minutes) is als° dispIayed"

been chosen with any wash cycle,

HEATED DRY - appears if Heated DU is selected.

HEATING - appears when the water temperature is low and tile beating element is on during washing or rinsing portions of the cycle. It is NOT lit during the drying portion of the cycle.

Page 8

Page 9
Image 9
Maytag 9962 warranty Starting The, Display Window, Child Lock, Dishwasher, Cycle Progression, Special Indicators, Page