BEFORE

YOU

CALL...

 

 

 

Cheek these points to help save yon time and money:

 

Won't Fill

 

 

 

Be sure door

is latched securely.

 

 

 

 

 

 

• Be sure the water is turned on.

 

 

 

 

 

 

• Check that the dial/pad is properly selected for a cycle.

 

 

 

 

 

 

• Allow time for select models to drain/pause before filling.

 

 

 

 

 

 

• Check your home's circuit breaker or fuse box.

 

 

 

 

 

 

• If LOCKED appears in the display, press the Lock Pad 3 times within 3 seconds

 

 

 

 

 

 

to unlock.

 

 

 

 

 

 

 

• Cheek inlet hose for a kink.

 

 

 

 

 

 

• Check water valve inlet for sediment and dean if necessary.

 

Won't Drain/Water

in

 

• If hooked up to a food waste disposer, be sure the knock--out is removed

from

Tub Bottom

 

 

 

 

the disposer inlet.

 

 

 

 

 

 

• Be sure the drain hose is elevated at least 32" so water cannot siphon back into

 

 

 

 

 

 

the tub,

 

 

 

 

 

 

 

• Check drain hose for a kink.

 

 

 

 

 

 

• Check your home's circuit breaker or fuse box.

 

 

 

 

 

 

Cheek

that the cycle is completed.

 

Detergent

Cup

Not

Empty

 

• Check

that the cycle is completed.

 

 

 

 

 

 

Be sure dispenser is not blocked.

 

 

 

 

 

 

Use fresh detergent stored in a cool, dry place.

 

Seems Noisy

 

 

 

A water valve hiss during fill is normal.

 

 

 

 

 

 

• Water eirculataion sounds are normal.

 

 

 

 

 

 

• A thumping sound may be a wash arm bumping an item that is extending beyond

 

 

 

 

 

 

the racks.

 

 

 

 

 

 

 

• Chopping or grinding sounds may be heard during drain as the internal food dis-

 

 

 

 

 

 

poser chops hard items like fruit seeds, nuts, etc.

 

 

 

 

 

 

• Humming during drain is normal.

 

 

 

 

 

 

• A snap noise is the detergent cup lid hitting the door liner when the dishwasher

 

 

 

 

 

 

door is opened at the end of the cycle. This is normal.

 

 

 

 

 

 

• Proper installation affects the noise level.

 

Cycle Takes Too Long

 

• Check to see that the incoming water temperature is at least 120-140°F.

 

Has An Odor

 

 

 

• Dishes being

held for a full load may need to be run through a Rinse & Hold

 

 

 

 

 

 

cycle while waiting. (Select models)

 

 

 

 

 

 

• Many dishwashers have a "new" smell when first installed. It disipates with use.

 

 

 

 

 

A ehemical odor is usually the ehlorine bleach in dishwashing detergents.

Yon

 

 

 

 

 

 

may want to try another brand.

 

 

 

 

 

 

• Dishwasher not draining properly. (See "%Von'tDrain" section.)

 

Leaks

 

 

 

 

• Cheek

that the dishwasher is level. (Refer to the Installation Instructions.)

 

 

 

 

 

 

• Suds can cause the dishwasher to overflow. Measure the detergent carefully and

 

 

 

 

 

 

use only detergents designed for use in a dishwasher. Less detergent is needed in

 

 

 

 

 

 

soft water. Try another brand ff sudsing continues.

 

 

 

 

 

 

• Follow directions closely on how to add a forgotten item. (See pg. 9)

 

 

 

 

 

 

• To avoid rinse aid leaking from the dispenser, be sure the lid is securely attached.

Displays

WASH ARM

 

• The lower wash arm is turning too slow due to excessive sudsing. Try another

 

 

 

 

 

 

brand of detergent and use recommended amounts.

 

Displays BLOCKED

DRAIN

• Make sure _e

food w_te disposer is empty" to allow proper draining.

 

and beeps

 

 

 

If thediqx_ser

is em_pty,the drain h0se may be bloekekl madservice iSneeded.

 

Page 12

Page 13
Image 13
Maytag 9962 warranty Before YOU Call, Tub Bottom, Displays Blocked, Beeps