CHECKING RINSE AID
reduces spotting and filming,
[ Regular use of a rinse aid improves drying and ]
Your Ma?tag Jetelean TM dishwasher features an auto- marie rinse aid dispenser located near the detergent cups in the door.
The clear window in the center of the dispenser cap allows you to see if there is rinse aid in the reservoir. When it is time to refill the dispenser, the words "LOW RINSE AID" will light in the control panel display,
E.
O ";
/
'
//
"-
To add rinse aid to the dispenser, turn the cap counter-
clock_dse to open. Remove the cap and pour liquid rinse aid into the opening. Replace the cap and turn it cloclc,_dse,
An adjnstable cap found on some models allows you to adjust the amount of rinse aid dispensed. A raised dot
on the cap indicates the recoimnended initial setting. Typically, use the LESS setting for so{_ water and the
MORE setting for hard water. Set the cap anywhere between these amounts as needed. To improve drying, turn the cap towards the MORE setting. When adjust- ing or replacing the cap, be sure it is securely in place before closing the dishwasher door.
ENSURING HOT WATER
water is necessary. The incoming water tem- For good cleanlng and drying results, hot perature should be
activate the detergent and melt greasy food soils.
To check the incoming water temperature, turn on the hot water faucet nearest the dishwasher and let it run
into a glass in the sink. Place a candy thermometer in
the glass and cheek the temperature once it has stopped rising. If the temperature is below 120°F (49°C), have a
qn_i}ied person raise the water heater thermostat set- ting.
Before starting the dishwasher, turn on the hot water lancet and let it run until the water is hot.
SPI:CIAI_ TIPS
* Select Smart Start
This selection monitors the items whieh affect results and dexelops a cycle for best results.
•Use HOT Water
Hot water dissolves and activates the detergent, dis- solves grease from the load and improves drying results. Refer to page 6 for more information.
•Use Proper Detergent Amount
For best soil removal, good duing results and pre- vention of fihning, etching and spotting, the proper
amount of detergent must be used. Refer to page 5 for recommended amounts.
•Use a Rinse Aid
Regular use of a rinse aid improves di'ying results
and reduces spotting and filming. See page 6 for more information.
•Load the Dishwasher Properly
To ensure soiled surfaces get adequate wash action, earefnlly follow the loading instructions on pages
•Select Heated Dry
For improved chying select Heated DU,
Page 6
