Change Access Code
The
Service Menu
The HD tuner is an advanced media device with the ability of communicating through an RF network to maintain updated firmware and control. The features outlined below are advanced functions designed for an integrated RF system.
This menu area is used to set up parameters for servicing the tuner or performing service functions.
Update Channel
This feature is used for setting a channel to perform firmware updates. Using the numeric keys on the remote, enter the channel that has been identified by your system administrator for firmware updates.
Allow Update Searching
This YES / NO selection either allows or prohibits the display from searching for an update channel for firmware updates. Having this selected as YES will allow updates when the Update Channel needs to be changed for some reason.
Start Firmware Update
To manually initial a firmware update, press the Right arrow button on the remote from this menu line. NOTE: By selecting this item, the tuner will immediately begin the firmware update process and reboot when complete.
Note:
During a firmware update, the Display MUST NOT be unplugged or turned off.
20
Copyright 2007 – Enseo, Inc.
14
