Amana RSS, RST Delayed Time Bake, Setting The Time For Self-Clean To Start Self-Clean Now

OPERATION AND SERVICE PROCEDURES

(SLIDE IN MODELS)

DELAYED TIME BAKE

Oven starts at a later time and shuts off at the end of the cooking cycle.

1.Turn selector switch knob to "AUTO".

2.Turn oven control knob to the desired baking tem- perature.

3.Press "COOK/CLEAN TIME" button. The display will show "0:00".

4.Press the "UP" button to set the desired length of baking time. EXAMPLE: To time bake for three (3) hours press and hold the "UP" button until "3:00" appears on the display, then release the UP button.

5.Press the "STOP TIME" button.

6.Press the "UP" button to set the desired stop time. To have the time bake cycle finish at five o-clock (5:00), press and hold the "UP" button until "5:00" appears on the display, then release the "UP" button. After approximately five (5) seconds, the display reverts back to the Time-of-Day and "AUTO" appears on the left of the display indicating that the Clock/Timer is programmed for an automatic timed function. The clock will automatically calculate the start time. When the starting time is reached, the oven indicator in the center of the display will come on indicating that the timed bake cycle has started.

When the stop time is reached, the oven indicator turns off and an alarm will sound for approximately ten (10) seconds. The oven will automatically turn off and AUTO will continue to blink ON and OFF indicat- ing that the Clock/Timer was set for an automatic timed mode and it is completed.

7.Turn the selector switch to "MANUAL", the oven control to the OFF position, and press the "CANCEL/ CLOCK" button.

SETTING THE TIME FOR SELF-CLEAN

TO START SELF-CLEAN NOW:

1.Turn the Selector switch knob to the "AUTO" position.

2.Turn the oven control counterclockwise until it stops ("CLEAN - TURN TO STOP" position).

3.Move the latch lever to the right hand (self-clean) position. The clean indicator will now come on.

25

4.Press the "COOK/CLEAN TIME" button. The display will show "0:00".

5.Press the "UP" button to set the desired length of the clean time. EXAMPLE: To self-clean the oven for three (3) hours, press and hold the UP button until "3:00" appears on the display, then release the "UP" button.

After approximately five (5) seconds, the display reverts back to the Time-of-Day and "AUTO" appears on the left of the display along with the oven indicator in the center of the display signifying that the clean cycle has started.

The oven indicator light on the control panel will come on and cycle ON and OFF with the thermostat.

6.At the end of the clean cycle the oven indicator light and oven indicator (clock) will turn OFF, and an alarm will sound for approximately ten (10) seconds. The oven will automatically turn off and "AUTO" will continue to blink ON and OFF indicating that the Clock/Timer was set for an automatic timed mode and it is now completed.

7.Turn the selector switch to "MANUAL", the oven control to "OFF" and press the "CLOCK/CANCEL" button.

8.The oven door can be opened approximately 30 minutes after the completion of the clean cycle. Do not attempt to open the oven door latch until approxi- mately thirty (30) minutes have elapsed, otherwise the door lock mechanism may be damaged.

If the door will not open, wait five (5) minutes and try again.

TO START SELF-CLEAN LATER:

1.Turn the selector switch knob to the "AUTO" position.

2.Turn the oven control counterclockwise until it stops ("CLEAN" - turn to "STOP" position).

3.Move the latch lever to the right hand ("SELF-CLEAN") position. The clean indicator will now come on.

4.Press the "COOK/CLEAN" button.

5.Press the "UP" button to set the length of time desired to self-clean the oven. For example, to self-clean up to three (3) hours, press and hold the "UP" button until "3:00" appears on the display, then release the "UP" button.

RC231002 Rev. 3