Black Box MD1641A, MD1640A manual Result Codes, Sr?, Sr=, #RCBNxx

SERIES II INTELLIGENT DATA/FAX MODEMS

READ AND	Sr?	Read Current S-Register Value
ASSIGN	Sr=	Assign S-Register Value
S-REGISTER
VALUES
REMOTE	#CBN	Passwords for Callback Phone #s
CONFIGURATION	#DB	Callback Security Enable/Disable
& CALLBACK	#I	Change LOGIN Password
SECURITY	#RCBNxx
		Erase Password Linked with
		Memory Location xx
	#S	Change SETUP Password
TEST MODEM	U	Self-Test Modem (Chapter 8)
	&T	Enable/Disable Digital Loopback
		Signal

5.3 Result Codes

The Series II Modem Command mode provides you with several re- sponses, or “Result Codes”, that can aid you in Command mode operation. These Result Codes are displayed on your video monitor.

You can choose result codes that closely match those of the standard AT command set, or choose enhanced function result codes that have been used in Series II Modems (“Series II" responses). The &Q command selects which result codes will be used.

You can choose to have these Result Codes displayed in either “verbose” (full words) or “terse” (digits) format. This is controlled by the ATV0 (terse) or ATV1 (verbose) commands. The Series II Modem defaults to verbose format.

AT&Q0 selects Series II responses with Reliable/LAPM/Compression modifiers. The terse response code for CONNECT 2400 is 9. AT&Q1 selects Standard AT command set responses. The terse result code for CONNECT 2400 is 10.

50