Samsung UBD-M8500/EN manual Connecting to a Network Router, Wireless Network, Wired Network

Connections

Connecting to a Network Router

You can connect your product to your network router using one of the methods illustrated below. The connection can be wireless or wired.

Wireless Network

Router

Wall connection

\\ Wireless LAN, by its nature, may cause interference, depending on the operating conditions (router performance, distance, obstacles, interference by other radio devices, etc).

Wired Network

Router or wall connection

OPTICAL
DIGITAL
AUDIOOUTLAN	HDMI OUT

NOTES

\\ If your wireless router supports DHCP, this product can use a DHCP or static IP address to connect to the wireless network.

\\ Set your wireless router to Infrastructure mode. Ad-hoc mode is not supported.

\\ The product supports only the following wireless security key protocols:

-- WEP (OPEN/SHARED), WPA-PSK (TKIP/ AES), WPA2-PSK (TKIP/AES)

\\ Select a channel on the wireless router that is not currently being used. If the channel set for the wireless router is currently being used by another device nearby, it will result in interference and communication failure.

\\ If you select the Pure High-throughput (Greenfield) 802.11n mode and set the Encryption type on your router to WEP, TKIP or TKIP-AES (WPS2Mixed), the product will not support a connection in compliance with new Wi-Fi certification specifications.

NOTES

\\ Your router or your Internet Service Provider's policies may prevent the product from accessing Samsung's software update server. If this occurs, contact your Internet Service Provider (ISP) for more information.

\\ DSL users, please use a router to make a network connection.

\\ Use Cat 7 (*STP Type) cable for the connection. (* Shielded Twist Pair)

16 English