SMART Interaction (Voice and Motion Control)
Using this function, you can access and control menu options and functions using speech, motions or face recognition.
%Refer to the
%Note that the illustrations in this guide may differ from the actual interface on the TV.
Voice Control Environment
•We recommend using the Voice Control function via the microphone attached to your TV from within 4M of your TV.
You can check the usable distance by using Voice Control Environment Test (System → Voice and Motion Control → Voice Control → Voice Control Environment Test).
•Voice Control performance may vary depending on the language spoken, your pronunciation, the volume of your voice and your surrounding environment, including ambient noise levels.
Motion Control Environment
•We recommend using the Motion Control function within about 1.5M ~ 4M with your TV. The TV Camera’s recognition range may differ depending on the angle of camera or other conditions.
You can check the recognition range of TV camera by using Motion Control Environment Test (System → Voice and Motion Control → Motion Control → Motion Control Environment Test).
•Motion Control recommended to run a Motion Control Environment Test (as described below) which measures the ambient light in the room, and ensures the
Voice Control
Voice Control lets you activate and access certain menus and functions on your Smart TV with the sound of your voice.
Menu → System → Voice and Motion Control → Voice Control
More Commands.
“More Commands” |
|
|
|
|
|
TV Power Off | Source | Channel | Channel Up/ | Volume Up/ | Mute |
| Number | Down | Down | MoreCommands | |
|
|
|
|
|
%You can also turn your TV on or off using your Trigger Words. For example, if you selected “Hi TV”, say “Hi TV Power On” to turn your TV on.
−If the Trigger Words is set to Hi TV, say Hi TV Power On.
−If the Trigger Words is set to Smart TV, say Smart TV Power On.
1Select “On” for Voice Control.
2Speak the Trigger Words that you selected into the microphone embedded in the TV or press the VOICE˜ button on your remote. The TV displays the Voice Command Bar.
3Say a word or phrase listed in the Voice Command Bar.
%Pronounce the word or phrase clearly and correctly in the language you selected in
Language.
4Wait until recognition is complete, and then say the next command in the same fashion.
%To exit the Voice Control mode, speak the Trigger Words or “Cancel” using the TV’s microphone, or press the RETURNR button.
Motion Control
Motion Control works with the Smart TVs
Menu → System → Voice and Motion Control → Motion Control
<Front Camera> | <Back of TV> |
• Scroll wheel on the back of your TV to adjust camera angle.
(ON) (OFF)
All
Pointing Navigation | Run |
1Select “On” for Motion Control.
2With Motion Control configured and activated, stand or sit in front of your TV. Make sure your hand is flat and palm is directly toward the TV wave three or four times side to side in a deliberate manner. When the TV recognizes you, the arrow cursor will appear on the screen. You are now able to control the TV with motion.
%If you drop your hand out of range of the TV camera Motion Control will close. Simply raise your hand within 3 seconds to reactivate Motion Control.
3Control the TV using your hands.
%While using the Motion Control, if you use other devices (i.e. remote control, keyboard, etc.), Motion Control closes.
English - 4
