Samsung UE50F6200AKXRU Network Security Protocols, Network Connection Wired, LAN Port on the Wall

Network Security Protocols

The TV only supports the following wireless network security protocols and is unable to connect to non- certified wireless routers:

•• Authentication Modes: WEP, WPAPSK, WPA2PSK

•• Encryption Types: WEP, TKIP, AES

If the wireless router has been set to Pure High-throughput (Greenfield) 802.11n mode and the Encryption Type to WEP or TKIP, Samsung Smart TVs will not support the connection in compliance with the new Wi- Fi certification specifications.

If the wireless router supports WPS (Wi-Fi Protected Setup), it is possible to connect to the network using PBC (Push Button Configuration) or a PIN (Personal Identification Number). WPS automatically configures the SSID and WPA key settings.

Network Connection - Wired

There are three main ways to connect your TV to your network using cable, depending on your network setup. They are illustrated starting below:

The Modem Port on the Wall	TV Rear Panel
	External Modem
(ADSL / VDSL / Cable TV)
Modem Cable (Not Supplied)	LAN Cable (Not Supplied)

		TV Rear Panel
The Modem Port on the Wall	External Modem	IP Router that has a
(ADSL / VDSL / Cable TV)
		DHCP Server
Modem Cable	LAN Cable	LAN Cable
(Not Supplied)	(Not Supplied)	(Not Supplied)

TV Rear Panel

The LAN Port on the Wall

LAN Cable (Not Supplied)

✎✎ The TV does not support network speeds less than or equal to 10Mbps. ✎✎ Use Cat 7 cable for the connection.

English

English - 11