TV Remote Control Buttons Available in Anynet+ Mode
Device TypeOperating StatusAvailable Buttons

 

After switching to the device, when the

Numeric buttons

Anynet+ Device

menu of the corresponding device is

Wheel (▲/▼/◄/►) ENTEREbuttons

displayed on the screen.

Colour buttons / EXIT button

 

After switching to the device, while playing

π(Backward search) / μ(Forward search) /

 

a file

(Stop) / (Play) / (Pause)

Device with built-in

After switching to the device, when you

P >/ P <button

Tuner

are watching a TV programme

 

Audio Device

When Receiver is activated

Y/ MUTE button

N The Anynet+ function only works when the active source on the TV remote control is set to TV.

N The button works only while in the recordable state.

N You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet+ devices only using the TV remote control.

N The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device. N The Anynet+ functions do not operate with other manufacturers’ products.

N The π, μoperations may differ depending on the device.

¦Recording

You can make a recording of a TV programme using a Samsung recorder.

1.Press the TOOLS button. Press the ENTEREbutton to select Anynet+ (HDMI-CEC).

2.Press the ▲ or ▼ button to select Recording Immediately and press the ENTERE button. Recording begins.

N When there is more than one recording device

When multiple recording devices are connected, the recording devices are listed.

Press the ▲ or ▼ button to select a recording device and press the ENTERE button. Recording begins.

N When the recording device is not displayed select Device List and press the Red button to search devices

3.Press the EXIT button to exit.

N You can record the source streams by selecting Recording: (device_name).

View TV

Device List

Recording: DVDR

DVDR MENU

DVDR INFO

Receiver: Off

Setup

UMove EEnter RReturn

NPressing the button will record whatever you are currently watching. If you are watching video from another device, the video from the device is recorded.

NBefore recording, check whether the antenna jack is properly connected to the recording device. To properly connect an antenna to a recording device, refer to the recording device’s users manual.

¦Listening through a Receiver (Home Theatre)

You can listen to sound through a receiver instead of the TV speaker.

1.Press the TOOLS button. Press the ENTEREbutton to select Anynet+ (HDMI-CEC).

2.Press the ▲ or ▼ button to select Receiver. Press the ◄ or ► button to select On or Off.

3.Press the EXIT button to exit.

N If your receiver supports audio only, it may not appear in the device list.

N The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO OUT (OPTICAL) jack of the TV.

N When the receiver (home theatre) is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home Theatre receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will Theatre receiver.

View TV

Device List

Recording: DVDR

DVDR MENU

DVDR INFO

Receiver: Off

Setup

UMove EEnter RReturn

be heard from the Home

NIf there is a power interruption to the TV when the Receiver is set to On (by disconnecting the power cord or a power failure), the Speaker Select may be set to External Speaker when you turn the TV on again.

English - 60