Connections

CONNECTIONS COMMON INTERFACE SlotTo watch paid channels, the “CI or CI+ CARD” must be inserted.

yy If you don’t insert the “CI or CI+ CARD,” some channels will display the message “Scrambled Signal”.

yy The pairing information containing a telephone number, the “CI or CI+ CARD” ID the Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.

yy When the configuration of channel information has finished, the

message “Updating Completed” is displayed, indicating the channel list is updated.

NOTE

xx You must obtain a “CI or CI+ CARD” from a local cable service provider.

xx When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may cause damage to it.

xx Insert the “CI or CI+ CARD” in the direction marked on the card.

xx The location of the COMMON INTERFACE slot may be different depending on the model.

xx “CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer. xx If you have any problems, please contact a service provider.

xx Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or will not be seen.

Changing the Input Source

Source List

Use to select TV or an external input

SOURCE

sources such as a DVD / Blu-ray player /

 

cable box / STB satellite receiver.

 

■■ TV / Ext. / PC / AV / Component / HDMI1/DVI / HDMI2 / HDMI3 / HDMI4 / USBIn the Source List, connectedinputs will be highlighted.Ext. and PC always stay activated.

Edit Name

■■ VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name the device connected to the input jacks to make your input source selection easier.

When a PC with a resolution of 1920 x 1080 @ 60Hz is connected to the HDMI IN 1(DVI) port, you should set to DVI PC mode under Edit Name.

When connecting an HDMI/DVI cable to the HDMI IN 1(DVI) port, you should set to DVI PC or DVI Devices mode under Edit Name.

10 English