Samsung UE46C9000ZWXRU, UE46C9000ZWXBT manual Setting Up Your Remote, Setting up the Network

¦¦ Setting Up Your Remote

You can set up your 3” LCD Touch Remote to control your TV in three ways:

As a standard, IR (Infra Red) remote

As an IR remote, your LCD Touch Remote works the same way as a standard push button remote, except you touch icons and symbols on the LCD screen to control your TV instead of pushing buttons. Using your Touch Remote as an IR remote requires no more set up than a standard remote and gives you access to most of the remote’s functions and features.

As an extended distance, Wi-Fi remote

As an extended distance, Wi-Fi remote, your Touch Remote offers all the functions and features of the IR mode and, because it uses Wi-Fi radio waves instead of infra red waves to control your TV, it lets you control your TV from a much greater distance and even from around corners. It also gives you access to the Twin Display function which lets you watch the Programme

or content that is on your TV screen on the LCD screen of the Touch remote. The long distance, Wi-Fi mode requires a few additional setup steps; possibly including re-initialization. It also requires you to attach Samsung’s Wireless LAN Adapter (WIS09ABGN, WIS09ABGN2, or WIS10ABGN) to one of your TV’s USB ports.

As a networked, Wi-Fi remote

As a networked, Wi-Fi remote, your Touch Remote gives you all the functions and features of the IR and the extended distance modes and also gives you access to the Multimedia function which lets you listen to or view music, movie, and picture files from your PC on your TV screen. You can also download upgrades to your Touch Remote’s software directly from the Internet.

The networked, Wi-Fi mode requires the largest number of setup steps. In addition, to use the networked, Wi-Fi mode, you need a working local area network and a wireless router. You also need to attach Samsung’s Wireless LAN Adapter (WIS09ABGN, WIS09ABGN2, or WIS10ABGN) to one of your TV’s USB ports. To use the Multimedia function, you need to install Samsung’s PC Share Manager on your PC. You can download PC Share Manager from http://www.samsung.com.

¦¦ Setting up the Network

01Started Getting

You can set up a wireless network for the 3-inch remote control.

How to connect using PBC (WPS)

If your router has a PBC (WPS) button, follow these steps:

1.Connect your TV to your LAN.

2.On the Services screen, touch Settings → Remote Settings.

3.Touch Network.

4.Touch the PBC(WPS).

Press the PBC button on the

access point within 120

seconds.

Remaining Time : 112

Stop

5.If the Press PBC button on the access point within 120 seconds. message appears,

press the PBC button on the device to connect.

✎✎ For more information, refer to the wireless network setup manual of the device to be connected.

6.If the device is connected properly to the TV after starting count on message box then message box will be disappeared

automatically.

✎✎ If the connection fails, please retry after 2 minutes.

Connecting to network

To setup the wireless connection automatically, follow these steps:

1.Follow Steps 1 through 3 in the “How to connect using PBC (WPS)” procedure. ✎✎ If the intended network cannot be found in the list, select to open the list of

networks again.

2.Select a network and connect to the network using the encryption method (PIN, security key, ad-hoc, etc.) set for the network.

3.When the network connection is complete, select Test to perform a network test.

✎✎ For the automatic IP, the AP will automatically define the IP Address, Subnet Mask, Gateway and DNS server.

✎✎ For the manual IP, you can select Edit and directly enter the IP Address, Subnet Mask, Gateway and DNS server.

✎✎For Full Touch Remote instructions, please read the Touch Remote's user manual.

Network

Select a network.

Auto Configuration

Unsecured

Secured

Unsecured

Secured

PBC(WPS)

English 9