Samsung UE65C8000XWXXH, UE65C8000XWXBT manual Recording, Listening through a Receiver

xx When multiple recording devices are connected, the recording devices are listed. Select one recording device in the Device List.

Advanced Features

¦¦ Recording

You can make a recording of a TV Programme using a Samsung recorder.

1. Select Recording.

✎✎ When there are more than two recording devices

✎✎ When the recording device is not displayed, select Device List and press the Red button to search devices.

2.Press the EXIT button to exit.

✎✎ You can record the source streams by selecting Recording: (device_name).

✎✎ Pressing the �(REC) button will record whatever you are currently watching. If you are watching video from another device, the video from the device is recorded.

✎✎ Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an antenna to a recording device, refer to the recording device’s users manual.

¦¦ Listening through a Receiver

You can listen to sound through a receiver (i.e Home Theatre) instead of the TV Speaker.

1.Select Receiver and set to On.

2.Press the EXIT button to exit.

✎✎ If your receiver supports audio only, it may not appear in the device list.

✎✎ The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO OUT (OPTICAL) jack of the TV.

✎✎ When the receiver (i.e Home Theatre) is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying a DTV (aerial) signal, the TV will send out 5.1 channel sound to the receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the receiver.

✎✎NOTE

xx You can only control Anynet+ devices using the TV remote control, not the buttons on the TV.

xx The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device. xx The Anynet+ functions do not operate with other manufacturers’ products.

Using the ARC function

You can listen to sound through a receiver connected HDMI cable without the need for a separate optical cable.

1.Select Receiver and set to On.

2.Press the EXIT button to exit.

✎✎To use the ARC function, a receiver which supports the HDMI-CEC and ARC features must be connected to the HDMI IN 2 (ARC) port.

✎✎To disable the ARC function, set the Receiver to Off. Even if the TV transmits the ARC signal continuously, the receiver will be blocked from receiving the signal.

46 English

[UC8000_BT]BN68-02697P-03L05.indb 46

2010-11-23 오후 4:23:26