JVC CA-D302T, CA-D352TR manual Troubleshooting, English, Symptom, Possible Cause, Action

Models: CA-D302T CA-D352TR

1 37
Download 37 pages 11.91 Kb
Page 35
Image 35
Troubleshooting

Troubleshooting

If you are having a problem with your System, check this list for a possible solution before calling for service.

If you cannot solve the problem from the hints given here, or the Unit has been physically damaged, call a qualified person, such as your dealer, for service.

English

Symptom

No sound is heard.

Unable to record.

Poor radio reception

The CD skips.

Unable to operate the Remote Control.

The CD tray cannot be opened.

The CD does not play.

Operations are disabled.

The cassette door cannot be opened.

Possible Cause

Connections are incorrect, or loose.

Cassette record protect tabs are removed.

The antenna is disconnected.

The AM Loop Antenna is too close to the Unit.

The FM Wire Antenna is not properly extended and positioned.

The CD is dirty or scratched.

The path between the Remote Control and the sensor on the Unit is blocked.

The batteries have lost their charge.

The main AC power cord is not plugged in.

The CD is upside down.

The built-in microprocessor has malfunc- tioned due to external electrical interference.

During tape playing, the power cord was unplugged.

Action

Check all connections and make corrections. (See pages 4 - 5.)

Cover holes on back edge of cassette with tape.

Reconnect the antenna securely.

Change the position and direction of the AM Loop Antenna.

Extend FM Wire Antenna to the best reception position.

Clean or replace the CD.

Remove the obstruction.

Replace the batteries. Plug in the AC power plug.

Put the CD in with the label side up. Unplug the Unit then plug it back in.

Plug in the power cord, press the SymptomPossible Cause button, and then press the 0button.

31

Page 35
Image 35
JVC CA-D302T, CA-D352TR manual Troubleshooting, English, Symptom, Possible Cause, Action