JVC CA-D302T, CA-D352TR manual Alarm function, Light up, Blinking

When this Unit carries out EON Standby reception, the indication will change as follows:

1.Waiting for EON Standby reception.

	MHz
CONT. RANDOM	TA NEWS INFO EON
	ST

2.Preset stations are being searched for and while

preparing to change the station, sound will be muted.

MHz

TA NEWS INFO EON

ST

English

3.	The station will be changed and the Station				Light up
	name being received will appear on the display.
		Station name
			TA	NEWS	INFO EON
					ST

Blinking

•When using the DISPLAY MODE button to change the display, use the appropriate setting for the type of display.

Notes:

•EON broadcasts of some stations may not be compatible with this Unit. In the case of an incompatible EON broadcast, “EON” will not appear on the display.

•If the reception is unsatisfactory for a station among the preset stations, the station is searched for again. If after searching through the channels, the broadcasting station cannot be found, “NOTFOUND” is displayed alternately on the display. The Unit will return to the station to which it was previously tuned.

When broadcasting of the desired information has been completed, the Unit will automatically go back to the station which had previously been tuned to.

While receiving information on EON Standby reception, the station will not change to other stations even if the same information is available from them.

If the information you are waiting for is available from the current station, the indicator will blink.

ALARM function ——————————————————————

If an ALARM (Emergency) signal is received while receiving an EON code from a station, the Unit automatically switches to the station broadcasting the ALARM signal.

15