JVC CA-D302T manual Tuning In a Station, Changing the FM Reception Mode, One Touch Radio, English

You can listen to both FM and AM (MW/LW) stations. Stations can be tuned in manually, automatically, or from preset memory storage.

oBefore listening to the radio:

• Check that both the FM and AM (MW/LW) antennas are firmly connected. (See page 4).

One Touch Radio ——————————————————————

Just press the FM/AM button to turn on the Unit and start playing the most recent station tuned in. o You can switch from any other sound source to the radio by pressing the FM/AM button.

Tuning In a Station

Press the FM/AM button to turn on the radio.

The Frequency of the previously selected channel appears on the display.

FM/AM Switching between Frequency Bands———————————

or Press the FM/AM button.

Each time you press the button, the band alternates between FM and AM (MW/LW).

Three Ways to Select a Station ——————————————

o Press the TUNING DOWN or TUNING UP on the MULTI CONTROL repeatedly to move from frequency to frequency until you find the one you want. (Manual Tuning).

OR

o Press and hold the TUNING DOWN or TUNING UP on the MULTI CONTROL for a few seconds, the frequency starts changing on the display. When a station is tuned in, the frequency stops changing. (Auto Tuning).

OR

oPossible only after presetting stations.

Press once and release the 4/1P. DOWN or ¢/ÁP. UP on the MULTI CONTROL to go to

the next preset station.

You can also use the Remote Control to tune in preset channels:

1. Press the FM/AM button so that you can receive the most recent station tuned in.

2. Select the station by entering the preset number in the number keys of the Remote Control.

• Example: for channel 5, press 5. For channel 15, press +10 then 5. For channel 20, press +10, then 10. For channel 30, press +10 twice then 10.

	• After you have selected the preset number and the number is displayed, the broadcast frequency
	of the selected channel is displayed.
	Changing the FM Reception Mode
FM MODE	When an FM stereo broadcast is hard to receive or noisy, press the FM MODE button on the Remote
	Control so that the MONO indicator lights up on the display. Reception improves, but there is no stereo
	effect.
	To restore the stereo effect, press the FM MODE button on the Remote Control so that the MONO
	indicator goes off. In this stereo mode, the ST indicator lights up and you can hear stereo effects, when a
	program is broadcast in stereo.

English

11