Samsung UE55NU8000TXZG, UE65NU8000TXZT, UE49NU8000TXZT Performing the initial setup, Initial setup

05 Performing the initial setup

•• The initial setup differs from model to model.

•• Turn on the TV using the Pbutton on the remote control or TV controller.

•• Noise may occur temporarily when the TV communicates with mobile devices.

•• The SmartThings app is available on mobile devices for Android 6.0 or higher and iOS 10 or higher.

•• To perform initialisation by using the SmartThings app, the mobile device must have been connected via Wi-Fi.

•• When the pop-up for setup does not appear automatically on the SmartThings app of your mobile device, proceed with the process after manually adding the TV using Add Device on the dashboard of the SmartThings app.

You can also start the Initial Setup using the TV's menu ( > Settings > General > Start Setup).

Follow the instructions displayed on the Initial Setup screen and configure the TV's basic settings to suit your viewing environment.

Initial setup

When you turn on your TV for the first time, it immediately starts the Initial Setup. The Initial Setup allows you to configure the basic settings for the TV to operate, such as broadcast reception, channel search, and network connection, at one time.

•• Before starting the Initial Setup, be sure to connect external devices first.

•• To use the TV's smart features, the TV must be connected to the Internet.

•• If you connect any external device to HDMI IN (STB) before starting initial setup, the source of your live TV signal is set to STB. After finishing with this process, you will not be able to scan all channels and stores them in the TV’s memory.

•• If you want to connect aerial cable to your TV, select Aerial. In this case, you will be able to scan all channels and stores them in the TV’s memory.

English - 22