Samsung AM 20A1(B1)E06, UM 20A1(B1)E3, UM 18A1(B1)E2, UM 19A1(B1)E2 Removing Excess Humidity

Removing Excess Humidity

M		FF
OD	TURBO
E		O

O	DE	TURBO	F
			OF

M			F
O	DE	TURBO
			OF

If the atmosphere in your room is very humid or damp, you can remove excess humidity without lowering the room temperature too much.

1If necessary, press the (On/Off) button.

Result: ◆ The OPERATION indicator on the indoor unit comes on.

◆The air conditioner starts up in the mode selected when the unit was last used.

◆The indoor unit beeps.

IMPORTANT	The air conditioner is fitted with a protection mechanism
	to prevent the unit from being damaged when it is started
	immediately after being:

◆Plugged in

◆Stopped

It will start up normally after a three-minute.

2If the indication is not displayed at the top of the remote control, press the MODE button on the remote control one or more times until it appears.

Result: ◆ The indoor unit beeps each time you press MO DE .

◆The air conditioner starts up in Dry mode. Note You can change modes at any time.

3 To adjust the temperature, press the or buttons one or more times until the required temperature is displayed.

Possible temperatures are between 18°C and 30°C inclusive.

Result: ◆ Each time you press or :

-The temperature is adjusted by 1°C

-The indoor unit beeps

◆The air conditioner starts removing the excess humidity;

the quantity of air is adjusted automatically.

4To control the direction of the air flow, refer to page 14.

E-12