xxThe maximum displayed number of files, including sub folders, in one folder of USB storage device is 2000.

xxThe media may not be playing smoothly when using the device lower than USB 2.0.

Videos

Movie 01.avi

00:04:03 / 00:07:38

1/1

 

 

 

 

EPause LJump TTools RReturn

1.In the Media Play menu, press the ◄ or ► button to select Videos, and then press the ENTERE button.

2.Press the ◄/►/▲/▼ buttons to select a video in the file list.

3.Press the ENTERE button or (Play) button.

--The file name is displayed on the top of the screen with the playing time.

--If video time information is unknown, playing time and the progress bar are not displayed.

--During video playback, you can search using the ◄ and

yySupported Video Formats

File

Container

Video Codec

Resolution

Frame

Bit

Audio

Extension

rate(fps)

rate(Mbps)

Codec

 

 

 

 

 

 

 

 

 

 

 

 

DivX

 

 

 

 

 

 

3.11/4/5/6

 

 

 

 

*.avi

 

 

 

 

 

 

 

MPEG4 SP

1920x1080

 

30

 

*.mkv

 

 

AC3

*.asf

 

/ ASP

 

 

 

 

 

 

 

LPCM

 

 

 

 

 

*.wmv

AVI

 

 

 

 

H. 264 BP /

 

 

 

ADPCM

*.mp4

MKV

 

 

 

 

 

 

(IMA,MS)

MP / HP

 

 

 

*.3gp

ASF

 

 

 

 

 

 

AAC

 

 

 

 

*.vro

MP4

 

 

 

 

HE-AAC

*.mpg

3GP

Motion JPEG

640x480

 

8

 

WMA

*.mpeg

MOV

 

 

6~30

 

 

 

 

DD+

*.ts

FLV

 

 

 

 

 

 

 

 

MPEG

*.tp

VRO

 

 

 

 

Window

 

 

 

(MP3)

*.trp

VOB

Media

 

 

 

DTS

*.mov

PS

Video v9

 

 

 

(Core)

*.flv

TS

 

 

 

 

G.711

*.vob

 

 

1920x1080

 

30

(A -Law,

 

 

 

u -Law)

*.svi

 

MPEG2

 

 

 

 

 

 

 

 

*.divx

 

 

 

 

 

 

 

 

MPEG1

 

 

 

 

 

 

 

 

 

 

 

Other Restrictions

Video Decoder

Supports up to H.264, Level 4.1

H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported.

MPEG4 SP, ASP :

Below 1280 x 720: 60 frame max

Above 1280 x 720: 30 frame max H.263 is not supported.

GMC is not support. Audio Decoder

Supports up to WMA7, 8, 9 STD, 9 PRO, 10 PRO

WMA 9 PRO and WMA 10 PRO support 5.1 channel. (LBR mode of WMA Pro is not supported)

WMA Lossless is not supported.

Music

 

Playlist

3/15

I Love You

I Love you

 

Jhon

Jhon

 

1st Album

Music 1

 

No Singer

 

Pop

Music 2

 

2010

 

4.2MB

No Singer

 

 

Music 3

 

 

No Singer

 

 

Music 4

 

Photos

Normal

Image1024.jpg

1024x768

2010/2/1

3/15

EPause LPrevious/Next TTools RReturn

1.In the Media Play menu, press the ◄ or ► button to select Photos, then press the ENTERE button.

2.Press the ◄/►/▲/▼ buttons to select a photo in the file list.

3.Press the ENTERE button or (Play) button.

NOTE

xxWhile a photo list is displayed, press the (Play) / ENTERE button on the remote control to start a slide show.

xxAll files in the file list section will be displayed in the slide show. xxDuring the slide show, files are displayed in order.

xxDuring the slide show, you can adjust the slide show speed using (π) (REW) or (µ) (FF) button.

xxYou can move to other files using ◄ or ► button.

Media Play can play Music files automatically during a Slide Show if Background Music is set to On.

Media Play - Additional Functions

Videos/Music/Photos Play Option menus When playing a file, press the TOOLS button.

Category

Operation

Videos

Music

Photos

 

 

 

 

 

Title

You can select another video file

c

 

 

to play directly.

 

 

Repeat Mode

You can play movie and music

c

c

 

files repeatedly.

 

Picture Size

You can adjust the picture size to

c

 

 

your preference.

 

 

Picture Mode

You can adjust the picture setting.

c

 

c

Sound Mode

You can adjust the sound setting.

c

c

c

 

You can play the video with

 

 

 

Subtitle

Subtitles. This function only works

c

 

 

Setting

if the subtitles have the same file

 

 

 

name as the video.

 

 

 

Audio Format

You can select the digital audio

c

 

 

output format.

 

 

Audio

You can change the audio

 

 

 

language if the video has more

c

 

 

Language

 

 

 

than one language.

 

 

 

Stop Slide

 

 

 

 

Show /

You can start or stop a Slide

 

 

c

Start Slide

Show.

 

 

 

 

 

Show

 

 

 

 

Slide Show

You can select the slide show

 

 

 

NOTE

xxStandard dimensions for wall mount kits are shown in the table below.

xxWhen purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.

xxDo not use screws that do not comply with the VESA standard screw specifications.

xxDo not use screws that are longer than the standard dimension or do not comply with the VESA standard screw specifications. Screws that are too long may cause damage to the inside of the TV set.

xxFor wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on the wall mount specifications.

xxDo not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents.

xxSamsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions.

xxDo not mount the TV at more than a 15 degree tilt. xxAlways have two people mount the TV on a wall.

Product

TV size in

VESA screw hole specs

Standard

Quantity

Family

inches

(A * B) in millimeters

Screw

 

 

 

 

 

 

 

 

 

19~22

75 X 75

M4

 

 

 

 

 

 

LED-TV

 

26~28

100 X 100

4

 

 

 

 

 

 

Kensington Lock

The Kensington Lock is not supplied by Samsung. It is a device used to physically fix the system when using it in a public place. Refer to the manual provided with the Kensington Lock for additional information on proper use.

Please find a “K” icon on the rear of the TV. The Kensington slot is beside the “K” icon.

The position and color may differ depending on the model.

Assembling the Cable manager

Display Modes (HDMI/DVI Input)

Optimal resolution: 1366 x 768@60Hz

 

 

Horizontal

Vertical

Pixel Clock

Sync

1366 x

1920 x

Mode

Resolution

Frequency

Frequency

Frequency

Polarity

768

1080

 

 

(KHz)

(Hz)

(MHz)

(H / V)

 

 

 

 

 

 

 

 

 

 

 

 

IBM

640 x 350

31.469

70.086

25.175

+/-

c

c

720 x 400

31.469

70.087

28.322

-/+

c

c

 

 

640 x 480

35.000

66.667

30.240

-/-

c

c

MAC

832 x 624

49.726

74.551

57.284

-/-

c

c

 

1152 x 870

68.681

75.062

100.000

-/-

 

c

 

640 x 480

31.469

59.940

25.175

-/-

c

c

 

640 x 480

37.861

72.809

31.500

-/-

c

c

 

640 x 480

37.500

75.000

31.500

-/-

c

c

 

800 x 600

37.879

60.317

40.000

+/+

c

c

 

800 x 600

48.077

72.188

50.000

+/+

c

c

 

800 x 600

46.875

75.000

49.500

+/+

c

c

 

1024 x 768

48.363

60.004

65.000

-/-

c

c

 

1024 x 768

56.476

70.069

75.000

-/-

c

c

 

1024 x 768

60.023

75.029

78.750

+/+

c

c

VESA DMT

1152 x 864

67.500

75.000

108.000

+/+

 

c

 

1280 x 720

45.000

60.000

74.250

+/+

c

c

 

1280 x 800

49.702

59.810

83.500

-/+

 

c

 

1280 x 1024

63.981

60.020

108.000

+/+

 

c

 

1280 x 1024

79.976

75.025

135.000

+/+

 

c

 

1366 x 768

47.712

59.790

85.500

+/+

c

c

 

1440 x 900

55.935

59.887

106.500

-/+

 

c

 

1600 x 900RB

60.000

60.000

108.000

+/+

 

c

 

1680 x 1050

65.290

59.954

146.250

-/+

 

c

 

1920 x 1080

67.500

60.000

148.500

+/+

 

c

buttons.

In this mode, you can play movie clips contained in a game, but you cannot play the game itself.

yySupported Subtitle Formats

 

--External

 

 

Name

File extension

 

 

 

 

MPEG-4 timed text

.ttxt

 

 

 

 

SAMI

.smi

 

 

 

 

SubRip

.srt

 

 

 

 

SubViewer

.sub

 

 

 

 

Micro DVD

.sub or .txt

 

 

 

 

SubStation Alpha

.ssa

 

 

 

 

Advanced SubStation Alpha

.ass

 

 

 

--Internal

Name

Container

Format

 

 

 

Xsub

AVI

Picture Format

 

 

 

SubStation Alpha

MKV

Text Format

 

 

 

Advanced SubStation Alpha

MKV

Text Format

 

 

 

SubRip

MKV

Text Format

 

 

 

MPEG-4 Timed text

MP4

Text Format

 

 

 

yyVideo content will not play, or not play correctly, if there is an error in the content or the container.

yySound or video may not work if the contents have a standard bit rate/ frame rate above the compatible Frame/sec listed in the Supported Video Formats table.

yyIf the Index Table erroneous, the Seek (Jump) function is not supported.

yyThe menu may take longer to appear if the video’s bit rate exceeds 10Mbps.

yyVideo content can not be played if there are many contents in one file.

01:10 / 04:02

No Singer

 

 

Music 5

 

No Singer

SUM

EPause LJump TTools RReturn

1.In the Media Play menu, press the ◄ or ► button to select Music, and then press the ENTERE button.

2.Press the ◄/►/▲/▼ buttons to select the desired Music in the file list.

3.Press the ENTERE button or (Play) button.

During music playback, you can search using the ◄ and

button.

(REW) and μ (FF) buttons do not function during play.

Media Play only displays files with MP3 and PCM file extension. Other file extensions are not displayed, even if they are saved on the same USB device.

If the sound is abnormal when playing MP3 files, adjust the Equalizer in the Sound menu. (An over-modulated MP3 file may cause a sound problem.)

You cannot change the Mode in Background Music until the Background Music file has finished loading.

yySupported Photo Formats

Image

Photo

Resolution

JPEG

Base-line

15360 x 8704

Progressive

1024 x 768

 

Other Restrictions

yyCMYK, YCCK Color space JPEG are not supported.

Playing Multiple Files

Playing selected video/music/photo files

1.On the File List screen, highlight a file, and then press the Yellow button on your remote.

2.Repeat Step 1 to select multiple files.

NOTE

xxA c mark appears to the left of the selected files. xxTo cancel a selection, press the Yellow button again.

xxTo deselect all selected files, press the TOOLS button, select

Deselect All, and then the ENTERE button.

3.Press the TOOLS button, select Play Selected Contents, and then press the ENTERE button.

Playing a video/music/photo folder

1.With the folders on your USB device displayed, use the ◄/►/▲/▼ buttons to highlight a folder.

2.Press the TOOLS button, select Play Folder, and then press the ENTERE button.

Speed

speed during the slide show.

 

 

c

 

 

 

 

 

Background

You can set and select

 

 

 

background music when

 

 

c

Music

 

 

 

watching a Slide Show.

 

 

 

Zoom

You can zoom into images in full

 

 

c

screen mode.

 

 

Rotate

You can rotate images in full

 

 

c

screen mode.

 

 

Information

You can see detailed information

c

c

c

about the played file.

Settings

Using the Setup Menu

DivX® Video On Demand : Shows the registration code authorized for the TV. If you connect to the DivX web site and register with the 10-digit registration code, you can download the VOD activation file. Once you play it using Media Play, the registration is completed.

For more information on DivX® VOD, visit “http://vod.divx. com”.

Information: Select to view information about the connected USB device.

Other Information

Installing the Wall Mount Kit

The wall mount kit (sold separately) allows you to mount the TV on the wall.

For detailed information about installing the wall mount, see the instructions provided with the wall mount items. Contact a technician for assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the wall mount on your own.

Wall Mount Kit Specifications (VESA)

The wall mount kit is not supplied, but sold separately.

Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest dealer. If you install the TV on a ceiling or slanted wall, it may fall and result in severe personal injury.

 

 

32~40

200 X 200

M6

 

 

 

 

 

 

 

 

46~60

400 X 400

M8

 

 

 

 

 

 

 

Do not install your Wall Mount Kit while

 

 

 

 

 

 

your TV is turned on. It may result in

 

 

 

 

 

 

personal injury due to electric shock.

Securing the TV to the Wall

Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as follows.

To prevent the TV from falling

Since the necessary brackets, screws, and string or cable are not supplied, please purchase these separately.

1.Insert the screws into the wall brackets and firmly fasten them to the wall. Make sure the screws are firmly fixed to the wall.

We strongly recommend you drive the screws into a stud.

2.Using screws, insert the screws through the TV brackets, and then fasten the screws to the top VESA screw holes on the back of the TV.

3.Connect the brackets on the TV and the brackets on the wall with a strong string or cable, and then tie the string or cable tightly to the brackets.

Verify all connections are properly secured. Periodically check

the connections for any sign of fatigue or failure. If you have any doubt about the security of your connections, contact a professional installer.

Install the TV close to the wall so that it does not fall.

Connect the string or cable so that the brackets on the wall are at the same height or lower than the brackets on the TV. Untie the string or cable before moving the TV.

To purchase a TV Holder kit, contact Samsung customer care.

Troubleshooting

If the TV seems to have a problem, first review this list of possible problems and solution. If none of these troubleshooting tips apply, visit samsung.com, then click on Support, or call Samsung customer service at 1-800-SAMSUNG.

Problem

Possible Solution

 

 

Flickering and Dimming

If your Samsung Television is flickering or dimming sporadically, you may need to disable some of its energy efficient

 

features like the Eco Sensor or the Energy Saving feature. Follow the steps below with your remote to turn these

 

features off or on.

 

yy Energy saving : Menu → Setup → Eco Solution → Energy Saving →Select Settings

 

 

Component Connections /

If you find that the color on your Samsung television’s screen is not correct or black and white, first run a Self

Screen Color

Diagnosis Test on the TV to make sure there are no device issues.

 

yy Self Diagnosis : User Menu → Support → Self Diagnosis → Picture Test

 

yy If the test is ok, try making sure ;

 

yy Your connections are all consistent. For example, if you’ve used the AV In jack on your TV, make sure you have

 

used the AV Out jack on your video source.

 

yy Try making sure you have connected to the correct jacks. For example, if you use the Component jacks, labeled

 

Pb, Pr, and Y, to connect your TV and video source, make sure you have connected the blue Pb jack on the

 

video source to the blue Pb jack on the TV, the red Pr jack on the source to the red Pr jack on the TV.

 

 

Screen Brightness

If you find that the colors on your Samsung TV are correct but just a little too dark or bright, there are some settings

 

you should check before calling for a repair.

 

yy Backlight, Contrast, Brightness, Sharpness, Color, Tint and so on. Go to “Picture” in the Menu, and then try

 

adjusting these options.

 

 

Unwanted Powering off

If your Samsung TV appears to turn off by itself, there may be an issue with either your Timer settings or your Eco

 

friendly No Signal Power Off feature.

 

First make sure the Sleep Timer is not accidentally set. The Sleep Timer lets you fall asleep with the TV still on

 

knowing that it will turn off after a certain period of time and not waste energy.

 

yy Sleep Timer : User Menu → Setup → Time → Sleep Timer

 

If the Sleep Timer is not activated, you may have engaged the No Signal Power Off or Auto Power Off feature.

 

yy No Signal Power Off : User Menu → Setup → Eco Solution → No Signal Power

 

yy Auto Power Off : User Menu → Setup → Eco Solution → Auto Power Off

 

 

 

- 9 -

 

 

Trouble Powering On

Before you turn the TV on, find the red light on the right or left bottom of your TV. Press the power on button

 

on the TV or remote and the light should blink about 5 times before the TV turns on.

 

If you find that you are having trouble powering on your Samsung television, there are a number of things to check it

 

before making a call to the service department.

 

yy If you happen to be using the TV as a monitor and the stand-by light only blinks for a few seconds when you

 

press the power button, your PC is in sleep mode. To take your PC out of sleep mode, press a key on your

 

keyboard or move the mouse. Then try turning your TV on.

 

If you’re sure your power cord, remote control, and PC are functioning properly, you may be having a cable issue. If

 

you have a cable or satellite box, your TV may appear to be off because the cable or satellite box is not outputting a

 

signal. To test the signal output of your cable or satellite box, press the guide or info button on the cable or satellite

 

box remote control. If the screen displays the guide or info data, the problem is caused by the box.

 

 

Stand Assembly

• If you have any trouble assembling the stand, refer to “Install the Stand” in the Start Up or Stand Installation Guide.

 

 

Cannot find a channel

Re-run Plug & Play or run Auto Program. (go to MENU - Channel - Auto Program)

Poor Picture

First, perform the Picture Test and to see if your TV is displaying the test image properly.

 

Go to MENU - Support - Self Diagnosis - Picture Test

 

If the test image is properly displayed, the poor picture may be caused by the source or signal.

 

 

The TV image does not look as good as

• If you have an analog cable/satellite box, upgrade to a digital set top box. Use HDMI or Component cables to

it did in the store.

deliver HD (high definition) picture quality.

 

• Cable/Satellite subscribers: Try HD channels from the channel line up.

 

• Air/Cable Antenna connection: Try HD channels after running Auto Program.

 

Many HD channels broadcast up scaled SD (Standard Definition) content. The picture quality of up

 

scaled SD content is low.

 

• Adjust the Cable/Set top box video output resolution to 1080i or 720p.

 

 

The picture is distorted: macroblock

• Compression of video contents may cause picture distortion, especially on fast moving pictures such as those in

error, small block, dots, pixelization.

sports and action movies.

 

• A weak signal can cause picture distortion. This is not a TV problem.

 

• Mobile phones used close to the TV (within 3.3ft) may cause noise in the picture on analog and digital channels.

 

 

Color is wrong or missing.

• If you’re using a component connection, make sure the component cables are connected to the correct jacks.

 

Incorrect or loose connections may cause color problems or a blank screen.

 

 

There is poor color or brightness.

• Adjust the Picture options in the TV menu. (go to Picture Mode / Color / Brightness / Sharpness)

 

• Adjust the Energy Saving option in the TV menu. (go to MENU - Setup - Eco Solution - Energy Saving )

 

• Try resetting the picture to the default picture settings. (go to MENU - Picture - Picture Reset)

 

 

There is a dotted line on the edge of

• If the picture size is set to Screen Fit, change it to 16:9.

the screen.

• Change the cable/satellite box resolution.

 

 

The picture is black and white.

• If you are using an AV composite input, connect the video cable (yellow) to the Green jack of Component Input 1

 

on the TV.

 

 

When changing channels, the picture

• If connected to a cable box, please try to reset it. (Reconnect the AC cord and wait until the cable box reboots. It

freezes or is distorted or delayed.

may take up to 20 minutes)

 

• Set the output resolution of the cable box to 1080i or 720p.

 

 

Sound Problems

Perform the Sound Test to confirm that your TV audio is properly operating.

 

(go to MENU - Support - Self Diagnosis - Sound Test)

 

If the audio is OK, the sound problem may be caused by the source or signal.

 

 

There is no sound or the sound is too

• Check the volume of the device (Cable/Sat Box, DVD, Blu-ray, etc.) connected to your TV.

low at maximum volume.

 

 

 

The picture is good, but there is no

• If you are using an external device, check the device’s audio output option Ex. you may need to change your

sound.

cable box’s audio option to HDMI if the box is connected to your TV using an HDMI cable.

 

• Reboot the connected device by reconnecting the device’s power cable.

 

 

The speakers are making an

• Check the cable connections. Make sure a video cable is not connected to an audio input.

inappropriate noise.

• For Antenna or Cable connections, check the signal information. A weak signal may cause sound distortion.

 

• Perform the Sound Test as explained above.

 

 

No Picture, No Video

 

 

 

The TV will not turn on.

• Make sure the AC power cord is securely plugged into the wall outlet and the TV.

 

• Make sure the wall outlet is working.

 

• Try pressing the POWER button on the TV to make sure the problem is not the remote.

 

If the TV turns on, refer to ‘Remote control does not work’ below.

 

 

The TV turns off automatically.

• Ensure the Sleep Timer is set to Off in the Time menu.

 

• If your PC is connected to the TV, check your PC power settings.

 

• Make sure the AC power cord is plugged securely into the wall outlet and the TV.

 

• When you are watching TV connected to an antenna or cable connection, the TV will turn off after 10 - 15 minutes

 

if there is no signal.

 

 

 

- 13 -

1_BN68-05829B_ENG-US.indd 2

 

- 10 -

 

 

There is no picture/video.

• Check the cable connections. (Remove and reconnect all cables connected to the TV and external devices).

 

• Set your external device’s (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections to the TV

 

input. For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV.

 

• Make sure your connected devices are powered on.

 

• Be sure to select the correct input source by pressing the SOURCE button on the remote control.

 

• Reboot the connected device by reconnecting the device’s power cable.

 

 

RF (Cable/Antenna) Connection

 

 

 

The TV is not receiving all channels.

• Make sure the coaxial cable is connected securely.

 

• Run Auto Program to add available channels to the channel list.

 

go to MENU - Channel - Auto program then select Auto and make sure the correct Cable TV signal type is set

 

in the menu. There are 3 options. (STD, HRC and IRC)

 

• Verify the antenna is positioned correctly.

 

 

No Caption on digital channels.

• Check the Caption Setup menu. Try changing Caption Mode Service 1 to CC1.

 

• Some channels may not have caption data.

 

 

The picture is distorted: macroblock,

• Compression of video contents may cause picture distortion, especially on fast moving pictures such as those in

error, small block, dots, pixelization.

sports and action movies.

 

• A weak signal can cause picture distortion. This is not a TV problem.

 

 

Others

 

 

 

Purple/green rolling horizontal bars and

• Remove the left and right audio connections from the set-top-box. If the buzzing stops, this indicates that the set-

buzzing noise from the TV speakers with

top-box has a grounding issue. Replace the Component video cables with an HDMI connection.

Component cable connection.

 

 

 

The picture will not display in full screen.

• HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.

 

• Black bars on the top and bottom appear when movies that have aspect ratios different from your TV play on the

 

TV.

 

• Adjust the picture size option on your external device or change the TV to full screen.

 

 

The remote control does not work.

• Replace the remote control's batteries. Make sure you insert them with the polarity (+/–) correct .

 

• Clean the transmission window located on the top of the remote control.

 

• Try pointing the remote directly at the TV from 5~6 feet away.

 

 

The cable/set top box remote control

• Program the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for

does not turn the TV on or off, or adjust

the SAMSUNG TV code.

the volume.

 

 

 

A “Mode Not Supported” message

• Check the supported resolution of the TV and adjust the external device’s output resolution accordingly. Refer to

appears.

resolution settings in this manual.

 

 

Caption on the TV menu is greyed out.

• You cannot select Caption in the TV menu when watching content from a device connected via HDMI or

 

Component.

Caption must be activated on the external device.

There is a plastic smell from the TV. • This smell is normal and will dissipate in a few days.

TV Signal Strength is unavailable in the

• This function is only available for digital channels received through an Antenna / RF/Coax connection.

Self Diagnosis Test menu.

 

 

 

TV is tilted to the right or left side.

• Remove the stand base from the TV and reassemble it.

 

 

The Channel menu is grey out

• The Channel menu is only available when you select the TV source.

(unavailable).

 

 

 

Your settings are lost after 30 minutes or

• If TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Please change from

every time the TV is turned off.

Store Demo mode to Home Use mode using the Plug & Play procedure. Press the SOURCE button to select

 

TV mode, go to MENU → Setup → Plug & Play → ENTERE.

 

 

You have intermittent loss of audio or

• Check the cable connections and reconnect them.

video.

• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible

 

enough for long term use. If mounting the TV to the wall, we recommend using cables with 90 degree

 

connectors.

 

 

You see small particles when you look

• This is part of the product’s design and is not a defect.

closely at the edge of the frame of

the TV.

 

 

 

POP (TV’s internal banner ad) appears

• Select Home Use under Plug & Play mode. For details, refer to Plug & Play (Initial Setup).

on the screen.

 

This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

Watch these troubleshooting on video at www.samsung.com/spsn.

Some functions and pictures shown in this manual are available on specific models only.

You can keep your TV in optimum condition by upgrading it with the latest firmware from the Samsung web site (samsung.com

Support → Downloads). To upgrade, download the firmware to your computer, copy the firmware file to a USB memory stick, insert the USB memory stick into the TV's USB slot, and then select Support > Software Upgrade in the TV's menu.

-14-

- 11 -

Storage and Maintenance

If a sticker was attached to the TV screen, some debris can remain after you remove the sticker. Please clean it before watching the TV.

The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and screen carefully using a soft cloth to prevent scratches.

Do not spray water directly onto the

Clean the product with a soft cloth

dampened with in a small amount of

product. Any liquid that goes into the

water. Do not use a flammable liquid

product may cause a failure, fire, or

(e.g. benzene, thinners) or a cleaning

electric shock.

agent.

 

License

 

TheaterSound, SRS and the symbol are

SRS TheaterSound™ provides the most immersive

trademarks of SRS Labs, Inc.

surround sound experience from the TV's built-in

TheaterSound technology is incorporated under

speakers, while maintaining steady volume and

licence from SRS Labs, Inc.

delivering rich bass and clear dialog.

 

 

DivX Certified® to play DivX® video up to HD 1080p, including premium content.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx. com for more information and software tools to convert your files into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on- Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod. divx. com for more information on how to complete your registration. Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274 DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS 2.0+Digital Out is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Open Source License Notice

Open Source used in this product can be found on the following webpage. (http://opensource.samsung.com) Open Source License Notice is written only English.

To send inquiries and requests for questions regarding open sources, contact Samsung via Email (oss.request@samsung.com).

This product uses some software programs which are distributed under the Independent JPEG Group.

ICU License - ICU 1.8.1 and later

COPYRIGHT AND PERMISSION NOTICE

Copyright (c) 1995-2008 International Business Machines Corporation and others All rights reserved.

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, provided that the above copyright notice(s) and this permission notice appear in all copies of the Software and that both the above copyright notice(s) and this permission notice appear in supporting documentation.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization of the copyright holder.

All trademarks and registered trademarks mentioned herein are the property of their respective owners.

- 15 -

 

 

- 12 -

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Specifications

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Environmental Considerations

 

 

 

 

 

 

 

 

Operating Temperature

 

50°F to 104°F (10°C to 40°C)

 

 

 

 

 

 

Operating Humidity

 

10% to 80%, non-condensing

 

 

 

 

 

 

Storage Temperature

 

-4°F to 113°F (-20°C to 45°C )

 

 

 

 

 

 

Storage Humidity

 

5% to 95%, non-condensing

 

 

 

 

 

 

Model Name

 

UN28H4000AF

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Display Resolution

 

1366 x 768

 

 

 

 

 

 

Screen Size

 

28" Class

 

 

 

 

 

 

(Diagonal)

 

(27.5" measured diagonally)

 

 

 

 

 

 

Sound

 

5W x 2

 

 

 

 

 

 

Output

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Dimensions (W x H x D)

 

 

 

 

 

 

 

 

Body

 

25.3 X 15.6 X 2.4 inches

 

 

 

 

 

 

With stand

 

(643.4 X 396.5 X 62.9 (mm))

 

 

 

 

 

 

 

25.3 X 17.1 X 6.4 inches

 

 

 

 

 

 

 

 

(643.4 X 435.1 X 163.4 (mm))

 

 

 

 

 

 

Weight

 

 

 

 

 

 

 

 

Without Stand

 

8.2 lbs (3.73 kg)

 

 

 

 

 

 

With Stand

 

9.0 lbs (4.10 kg)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Design and specifications are subject to change without prior notice. This device is a Class B digital apparatus.

For information about the power required and more about power consumption, refer to the label attached to the product. Typical power consumption is measured according to Energy Star Program requirements for televisions.

Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.

samsung.com/recyclingdirect or call, (877) 278-0799.

 

 

 

 

 

 

 

 

 

 

JACK PANEL DETAIL / REAR VIEW

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

 

 

 

 

 

 

 

 

 

 

(Unit: inches)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Model name

 

1

 

 

2

 

3

4

 

5

6

 

 

 

 

 

 

 

 

 

 

 

 

UN28H4000AF

 

5.8

 

 

3.1

 

4.0

15.5

 

 

3.9

3.9

NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors.

© 2014 Samsung Electronics America, Inc

- 16 -

2014-01-29 �� 2:33:32

Page 2
Image 2
Samsung UN28H4000 Videos, Music, Photos, Kensington Lock, Assembling the Cable manager, Installing the Wall Mount Kit