◀ ▶
English
7. Select STD, HRC, or IRC, and then press ENTERE.
8. Repeat for Analog Cable System.
9. Select Next, and then press ENTERE. Auto Program starts.
NAfter all the available channels are stored, Auto Program removes scrambled
channels. When done, the Auto Program menu then reappears. This
process can take up to 30 minutes.
How to Stop Auto Programming
1. Press the ENTERE button to select Stop.
2. A message will ask Stop Auto Program? Select Yes by pressing the ▲ or ▼
button.
3. Press the ENTERE button.