76 77
Precautions
●To set up a Schedule Recording, you must first set the TV's clock. Set the Clock from System >
Time > Clock.
●Recordings are DRM-protected and therefore cannot be played back on a computer or on a
different TV. In addition, these files cannot be played back on your TV if its video circuit is
replaced.
●A USB hard drive with a speed of 5,400rpm or above is recommended. However, RAID-type USB
hard drives are not supported.
●A USB memory strick is not supported.
●The total recording capacity may vary depending on the amount of available hard drive space
and the recording quality level.
●Schedule Recording requires at least 100MB of free space on the USB storage device. Recording
will stop if the available storage space falls below 50MB while recording is in progress.
●If the available storage space falls below 500MB while the Schedule Recording and Time Shift
functions are in progress, only the recording will stop.
●The maximum recording time is 360 minutes.
●The TV's settings apply when playing back recordings and using the Time Shift function.
●If the input signal is changed while recording is in progress, the screen will go blank until the
switch is made. Recording will resume, but will not be available.
●Device Performance Test must be performed on the USB storage device connected to the TV
before a recording can be made. A Device Performance Test can be performed from the On TV or
Photos, Videos & Music > Recorded TV. If recording is selected from Guide or the Program Info,
USB storage device has failed the Device Performance Test, the TV will initiate Device Format
and conduct Device Performance Test again.
●When using the recording function, the actual recording may start a second or two later than the
specified time.
●If the Schedule Recording function is running at the same time as a recording is being made on
an HDMI-CEC-compliant external device, the priority is given to the Schedule Recording function.
●Connecting a TV-recording USB device automatically deletes abnormally saved Time Shift and
recording files.
●If Off Timer or Auto Power Off has been configured, the TV will override the setting if recording
is in progress at the specified time and turn off after the recording has ended.