troubleshooting

PROBLEM

SOLUTION

 

 

 

Motor does not start.

•

Check cable, plug and socket.

•

Leave to cool.

 

 

 

 

Suction force is gradually

•

Check for blockage and remove.

decreasing.

 

 

Cord does not rewind

•

Pull the cord out 2-3 m and push down the cord rewind button.

fully.

 

 

 

 

 

Vacuum cleaner does not

•

Check hose and replace if required.

pick up dirt.

 

 

Low or decreasing

•

Please check filter and, if required, clean as illustrated in the

suction.

 

instructions. if filters are out of condition change them to new ones.

 

 

 

Body overheating.

•

Please check filters, if required clean as illustrated in the instruction.

 

 

 

Static electicity

•

Please decrease power suction.

•

This can also occur when air in the room is very dry.

discharge.

 

Please ventilate the room to air humidity become a normal.

 

 

Thermal protector : This vacuum cleaner has a special thermostat that protects the motor in case of its overheating. If the vacuum cleaner suddenly shuts off, turn off the switch and unplug the vacuum cleaner. Make sure that there is power in the socket. To avoid electric shock, please contact a qualified electrician. Check the vacuum cleaner for possible source of overheating such as a full dust tank, a blocked

hose, pipe, or clogged filter. If these conditions are found, fix them and wait at least 30 minutes before attempting to use the vacuum cleaner. After the 30 minute period, plug the vacuum cleaner back in and turn on the switch.

If the vacuum cleaner still does not run, contact a service engineer.

This vacuum cleaner is compliant with the following regulations:

-RTTE Directive(1999/5/EC)

-Electromagnetic Compatibility Directive : 2004/108/EEC

-Low Voltage Directive : 2006/95/EC

The official Declaration of conformity may be found at http://www.samsung.com, go to Support Please search Product Support and enter the model name.

18_ troubleshooting