▼
OUTLET FILTER
1) Separate the exhaust filter.
2) Reassemble it after cleaning.
NOTE: The filters must be completely dried before being replaced in the dust compartment.
IF YOU HAVE A PROBLEM
This appliance was inspected thoroughly and was in good operating condition when it was shipped from the factory.
If a minor problem occurs, it can usually be solved quite easily when the cause is found. Therefore, this check list is provided for your convenience.
PROBLEM |
| POSSIBLE CAUSE |
| POSSIBLE SOLUTION |
|
|
|
|
|
Cleaner Will Not Run. | 1. | Not firmly plugged in. | 1. | Plug in firmly. |
| 2. | No voltage in wall plug. | 2. | Check fuse or breaker. |
|
|
|
|
|
Cleaner Does Not | 1. | Dust bag is full. | 1. | Change dust bag. |
Pick Up Properly | 2. | Hose clogged with | 2. | Remove the substance. |
|
| a large object. |
|
|
|
|
|
|
|
This Vacuum cleaner is approved the following
EMC Directive : 89/336/EEC, 92/31/EEC and 93/68/EEC
Low Voltage Safety Directive : 73/23/EEC and 93/68/EEC
7
