REPLACING THE DUST BAG
1)To open the dust cover of the dust bag compartment press the clamper upward (The clamper is located at the front of the dust cover)
2) Remove the carrying bag from the cleaner.
CARRYING BAG
3)After removing the used dust bag, insert the cardboard bag collar of the new dust bag into the carrying bag.
NOTE:
Used dust bag can be sealed by removing the film from the paper and sticking the latter over the suction opening. (ONLY PAPER BAG)
4)Press the dust cover down gently until the clamper relocks.
FOR CLOTH FILTER BAG
After using, if the cloth filter bag is full of dust, clean the cloth filter bag and use it again.
MAINTENANCE OR REPLACEMENT OF THE FILTERS
1)INLET-FILTER
❈Open the dust cover.
❈After detaching the filter, wash it lightly with water, dry it in the shade, and then insert it in its original position.
❈Close the dust cover.
OUTLET- |
FILTER |
INLET- |
FILTER |
2)OUTLET-FILTER
❈The
❈Open the dust cover, and then pull the hook upward. (The hook is located at the front of the dust cover)
❈Remove and replace the exhausted
❈Close the grille filter, and then close the dust cover.
6
