RUG/FLOOR SELECTOR 
Before use, make sure that the position of the selector button is in the right position for the type of surface to be cleaned. ❈ In order to maintain best cleaning efficiency, clean floor brush using crevice tool after use.
Push to side ➀ when cleaning the carpets.
Push to side ➁ when cleaning the floor, tile, mat, etc.
➀ ➁
CYCLONIC FILTER 
You can use a dust bag in your cleaner for a long time thanks to the Cyclonic Filter system and it maintain the maximum cleaning efficiency.
The larger particle of dust filtered from Cyclonic Filter remain in Dust Barrel when suctioned air and dust revolves in the Cyclonic Filter. So the dust bag contains only smaller ones.
When the Dust Barrel is filled with dust up to the indicating line, it needs disposing and cleaning. Dust Barrel can be cleaned in water.
1.Turn the Dust Barrel to the left and pull it.
2.Disconnect the Cyclonic Filter from extension wand and handle.
3.Remove thread and hair tangled around the net.
4.After cleaning the Dust Barrel and Cyclonic Filter, connect the Cyclonic Filter with extension wand and handle(washed part should be dried in the shade throughly before assembling).
5.Push and turn the Dust Barrel to the right.
Adjust indicating marks each other carved on Dust Barrel and Cyclonic Filter.
CYCLONIC FILTER 
DUST BARREL | CREVICE TOOL |
| ||
TROUBLE SHOOTING |
|
|
| |
|
|
| ||
|
|
| ||
|
|
|
|
|
PROBLEM |
|
| CAUSE | REMEDY |
|
|
|
|
|
Motor does not start. | No power supply. | Check cable, plug and socket. | ||
|
|
| ||
Suction force is gradually | Filter, nozzle, suction hose | Remove the object. | ||
decreasing. | or tube is blocked. |
| ||
|
|
| ||
Cord does not rewind fully. | Check that the cord is not | Pull the cord out 2~3m & push | ||
| twisted or wound unevenly. | down the cord rewind button. | ||
|
|
|
|
|
This Vacuum cleaner is approved the following.
N15490
7
