MAINTENANCE OR REPLACEMENT OF THE FILTERS
▲
INLET FILTER
The secondary filter, located behind the grille in the back of dust bag compartment, protects the motor from dirt particles.
Do not allow the filter to become clogged.
Suction power reduction or motor damage may result. If filter becomes dirty, pull off the grille and lift out filter. After cleaning the secondary filter attach it in place.
NOTE : The filters must be completely dried before being replaced in the dust compartment.
▲
OUTLET FILTER
Open the dust cover and lift off the grille.
For HEPA Filter Type
HEPA Filter |
Preliminary |
Filter |
Grasp filter and pull it out with preliminary filter. After cleaning preliminary filter, reposition new filter and preliminary filter by reversing this procedure.
For Micro Filter Type
Grille Filter |
Micro Filter |
Preliminary Filter |
Grasp grille filter and pull it out with preliminary filter. After cleaning preliminary filter, reposition new filter compartment and preliminary filter by reversing this procedure.
