
6 | CLEANING THE INLET FILTER |
| |
1 | 2 | 3 |
| NOTE : Regularly check if the filter gets clogged and if so, remove the dust particles from the | ||
7 | filter as filter clogging may cause the damage on the motor or suction decrease. | ||
1OUTLET FILTER | 2 | 3 |
|
| HEPA FILTER(option) | MICRO FILTER(option) |
- IF YOU HAVE A PROBLEM |
|
| |
|
|
|
|
PROBLEM |
| CAUSE | REMEDY |
Motor does not start. |
| No power supply. | Check cable, plug and |
|
| Thermal | socket. |
|
|
| Leave to cool. |
Suction force is gradually |
| Nozzle, suction hose or tube | Remove the object and |
decreasing. |
| is blocked. | change the |
Cord does not rewind fully. |
| Check that the cord is not | Pull the cord out |
|
| twisted or wound unevenly. | push down the cord rewind |
|
|
| button. |
Vacuum cleaner does not |
| Crack or hole in hose. | Check hose and replace if |
pick up dirt. |
|
| required. |
This Vacuum cleaner is approved the following.
EMC Directive : 2004/108/EEC
Low Voltage Safety Directive : 2006/95/EC
6