Samsung VCR8930L3S/XEG manual Delay Start, Remote Control Configuration Sequence

Delay Start

In this mode, you can schedule the cleaner to start a once-off cleaning run from a particular time.

■■ A scheduled cleaning run is only performed when the cleaner is docked to the charger station.

		Remote Control			Configuration Sequence
	Blinks			1.	Press the Delay Start button.
		Decrease	Increase	--	The current setting is
					displayed and		blinks.
Blinks					Press the  or  button to
					set the hour.
				2.	Press the Delay Start button.
		Decrease	Increase		Press the  or  button to
					set the cleaning mode.
Blinks	Blinks			--	You can select either Auto or
					Max cleaning mode.
				3.	Press the Delay Start button.
	Blinks			--	The value you set will
					blink and the settings are
					completed.
Blinks				--	When the settings are
					completed, the configured
					time and	are displayed.
		-- If you press the Start/Stop button while the cleaner is charging
Canceling the Settings		or you are setting the time, the settings are canceled.
		-- Please take note that the settings are canceled if the cleaner
		is detached from the charger station.
	Timeout	-- If there is no input for 1 minute while you are setting the time,
		the cleaner exits Time Set mode automatically.

32_ operating