Operating the cleaner
Installing the vacuum cleaning robot
Installation order
1. Turning the Power Switch on or off
To use the vacuum cleaning robot, you must turn on the Power Switch at the bottom of the main unit.
2. Installing the Charger
To charge the vacuum cleaning robot, you must first install the charger.
Since the battery is discharged when the product is purchased, you must fully charge the battery before use.
3. Charging the Battery
You should charge the battery completely before using the vacuum cleaning robot.
4.Installing the VIRTUAL GUARD
You can confine the vacuum cleaning robot to a particular section by using Fence (virtual wall) mode.
Turning the Power Switch on or off
To use the vacuum cleaning robot, you must turn the Power Switch on.
If you turn off the Power switch, all settings except for the current time and the Weekly reservations are reset.
❈❈ If no key is pressed for approximately 1 minute after turning the power on, the power is automatically cut to prevent the battery discharging.
To turn the power on again, press and hold the power (Start/ Stop) button on the main body.
1. Lift the body and turn on the power switch while making sure not to press any other button.
If the Power Switch is turned off, the vacuum cleaning robot will caution not be charged even if it is docked with the charger station.
20_ operating
