ENG
preparation
CHARGING THE BATTERY PACK
• Use the
• The battery pack may be charged a little at the time of purchase.
• Be sure to charge the battery pack before you start using your HD camcorder.
Inserting the battery pack
1. Open the battery pack cover by sliding the OPEN switch upward as shown in the figure.
2. Insert the battery pack into the battery pack slot until it softly clicks.
•Make sure that word mark (SAMSUNG) is facing left while the camcorder is placed as shown in the figure.
3.Close the battery pack cover.
Charging the battery pack
1. Slide the POWER switch downward to turn off the power.
2. Open the DC IN jack cover and connect the AC power adaptor to the DC IN jack.
3. Connect the AC power adaptor to a wall socket.
4. Once charged, disconnect the AC power adaptor from the DC IN jack on your HD camcorder.
• Even with the power switched off, the battery pack will still discharge if it is left inserted in the HD camcorder.
Charging, recording and playback times with a fully charged battery pack (with no zoom operation, LCD open, etc.)
Battery type |
|
| |
|
|
|
|
Charging time | approx. 100 min |
| |
|
|
|
|
Recording format | Continuous recording time |
| Playback time |
HD | approx. 85 min |
| approx. 120 min |
|
|
|
|
SD | approx. 90 min |
| approx. 130 min |
|
|
|
|
English _05