ENGLISH

Notices and Safety Precautions

Notes Regarding the Battery Pack

✤Make sure the battery pack is fully charged before starting to record.

✤To preserve battery power, keep the CAM turned off when you are not operating it.

✤If your device is left in STBY mode without being operated for more than 5 minutes, it will automatically turn itself off to protect against unnecessary battery discharge.

✤Make sure that the battery pack is attached firmly in place.

✤The new battery pack provided with the product is not charged. Before using the battery pack, you need to fully charge it.

✤Do not drop the battery pack. Dropping the battery pack may damage it.

✤Fully discharging a Lithium Polymer battery damages the internal cells. The battery pack may be prone to leakage when fully discharged.

✤To avoid damage to the battery pack, make sure to remove the battery when no charge remains.

✤Clean the terminal to remove foreign substance before inserting the battery pack.

✳When the battery reaches the end of its life, please contact your local dealer. Batteries must be disposed of as chemical waste.

✳Be careful not to drop the battery pack when you release it from the CAM.

Notes Regarding a Trademark

✤The logos regarding DivX, DivX Licensed are the trademark of DivX, Network, Inc and can be used after contracting license.

10

ENGLISH

Notices and Safety Precautions

Notes Regarding the Lens

✤Do not film with the camera lens pointing directly at the sun.

Direct sunlight can damage the CCD (Charge Coupled Device, the imaging sensor).

Notes Regarding the LCD Display

1.The LCD monitor has been manufactured using the high precision technology. However, there may be tiny dots (red, blue or green in colour) that appear on the LCD monitor. These dots are normal and do not affect the recorded picture in any way.

2.When you use the LCD monitor under direct sunlight or outdoors, it maybe difficult to see the picture clearly.

3.Direct sunlight can damage the LCD monitor.

Precautions Regarding Service

✤Do not attempt to service the CAM yourself.

✤Opening or removing covers may expose you to dangerous voltage or other hazards.

✤Refer all servicing to qualified service personnel.

Precautions Regarding Replacement Parts

✤When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer and having the same characteristics as the original part.

✤Unauthorized substitutions may result in fire, electric shock or other hazards.

11